Loading ...
Loading ...
Loading ...
12
Boosterfunction and double booster
The Booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high power.
Power is foreseen for example to heat up rapidly big quantities of water, like nuddles
• Start up / Stop the booster function:
Action Control panel Display
Zone selection Press on the “SLIDER“ [ 0 ] and control
across from the desired zone light on
Start up the booster Slide on the “SLIDER“ [ 0 ] to [ P ]
Stop the booster Slide on the “SLIDER“ [ P ] to [ 0 ]
• Start up / Stop the double booster function:
Action Control panel Display
Zone selection Press on the “SLIDER“ [ 0 ] and control
across from the desired zone light on
Start up the booster Slide on the “SLIDER“ [ 0 ] to [ P ]
Start up the double booster Slide on the “SLIDER“ [ and P ]
Stop the booster Slide on the “SLIDER“ [ P ] to [ 0 ]
• Power management:
The hole cooking hob is equipped by a maximum of power. When the booster function is
activated, and not to exceed the maximum power, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed:
Heating zone selected The other heating zone: (example: power level 9)
[ P ] is displayed [ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Timer
The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
Loading ...
Loading ...
Loading ...