Loading ...
Loading ...
Loading ...
12
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
6. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger.
Assembly
mWARNING! The pole hedge trimmer must be fully
assembled before operation! Do not use a pole hedge trimmer
that is only partly assembled or assembled with damaged
parts!
mWARNING! Do not install the battery until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
Follow the assembly instructions step-by-step and use the
gures provided as a visual guide to easily assemble the unit.
NOTE: Take care of small parts that are removed during
assembly or when making adjustments. Keep them secure to
avoid loss.
Assembling the Tool
The telescoping pole and trimmer head come unassembled.
Ensure that the pole hedge trimmer is assembled properly
before using.
1. Align the telescoping pole with the trimmer head.
2. Insert the telescoping pole into the trimmer head locking
base until the lock holes click into place (Fig. 4).
3. Slide the locking collar onto the locking base and turn
clockwise to secure (Fig. 5).
4. Make sure the rear handle is properly aligned with the
blade.
mWARNING! Make sure the telescoping pole is inserted
to a full stop and the locking collar is properly tightened before
using the pole hedge trimmer.
mWARNING! Failure to lock the telescoping pole as
directed above could result in serious injury or death.
NOTE: To disassemble the unit, screw the locking collar
counterclockwise to unlock the trimmer head, and remove the
screw on the lock base with a screwdriver. Then the trimmer
head can be pulled out from the pole (Fig. 6).
Fig. 6
Screw
Locking collar
Attaching the Shoulder Strap
mWARNING! Always attach the shoulder strap to the
pole hedge trimmer. Use the shoulder strap to help support the
trimmer while in use; do not carry the pole hedge trimmer with
only your hands.
1. Wear the shoulder strap over your non-dominant shoulder
so that the hook stays on the side of your dominant hand.
2. Fasten the carabiner hook to the bracket on the pole
(Fig. 7).
3. Adjust the length of the strap to attain a comfortable
working position.
mWARNING! In case of emergency, tug the quick-release
latch on the shoulder strap. The machine will be released from
the strap (Fig. 8).
Locking base
Lock hole
Trimmer head
Telescoping pole
Fig. 4
Fig. 5
Locking base
Locking collar
Fig. 7
Bracket
Carabiner hook
Loading ...
Loading ...
Loading ...