Loading ...
2
2. Ensure the log is free from items that may be projected or
cause damage to the machine (ie.: nails, wire).
3. Ensure the end of the log is cut square and all branches
have been cut ush.
OPERATION
Operator Requirements
1. Only one person shall operate the log splitter. All other
individuals and animals shall maintain a safe distance
during operation (see safety warning in Preparation).
2. Always operate the machine in a standing position and in
a location that is not in the path of projected debris. The
location of the machine should provide safe footing and
balance for the operator.
3. Do not operate the machine while under the inuence of
alcohol, drugs or physically, mentally fatigued. Always be
alert and watch what you are doing!
4. Contact with the moving parts can amputate body parts.
Do not put any part of your body near moving parts.
Workload Requirements
1. Never exceed the operating capacity of the log splitter.
2. Always split the log in the direction of the grain. Do not
place a log across the log splitter.
3. Never split more than one log at a time.
4. Do not load a log when the ram is moving.
Log Splitting
1. Remove any keys and adjusting wrenches before turning
the machine ON.
2. Do not use accessories or attachments that are not
recommended in this manual.
3. Place the log on the log retention brackets. Do not hold or
secure the log with your hands.
4. Do not split wood that takes more than 5 seconds to split.
Doing so will apply excessive pressure on the ram cylinder
and damage the machine.
5. Do not push/force the log onto blade. Always let the blade
initiate splitting the log.
6. If the log moves during operation, stop and reset.
7. If a log is jammed do not request assistance of a second
person. Ensure the machine power is disconnected and
built up pressure released before attempting to
release log.
8. Ensure the machine is turned OFF when not in use. If
the machine is left unattended then disconnect power to
the machine.
MAINTENANCE AND STORAGE
1. Maintain or replace safety and instruction labels. Ensure
safety guards are in place.
2. Disconnect the power and ensure built up pressure has
been released from the tool before cleaning, repairing, or
inspecting the log splitter.
3. For best operation keep the blade sharp, moving parts
lubricated and the machine cleaned.
4. Always check for damaged or worn parts, alignment of
moving parts, and tightness of bolts and screws before
each use.
5. Replace oil as specied in the Maintenance section.
Follow all local regulations and laws concerning disposal
of waste oil.
6.
Qualied mechanics and electricians must carry out repairs.
7.
When not in use, always store the machine in a secure
location that children cannot access. Store the machine in a
dry environment. The machine can be transported or stored in
the ambient temperature between 77ºF – 131ºF (25ºC – 55ºC).
Electrical Safety
1. Ground fault circuit interrupter (GFCI) protection should
be provided on the circuit(s) or outlet(s) to be used for the
log splitter. Receptacles are available having built-in GFCI
protection and may be used for this measure of safety.
2. To reduce the risk of electric shock, this appliance has a
3-prong grounding plug. Use this appliance only with a
3-prong, UL-listed (CSA certied in Canada) extension
cord recommended for outdoor use. Use only 3-wire
extension cords that have 3-prong grounding plugs and
3-pole receptacles that accept the tool’s plug.
3. To prevent electric shock, use only with an extension cord
suitable for outdoor use, such as SW, SOW, STW, STOW,
SJTW, or SJTOW.
Before use, check that the extension cord is in good
condition. When using an extension cord, make sure to
use one heavy enough to carry the current your product
will draw. An undersized cord will cause a drop in line
voltage resulting in loss of power
and overheating.
Extension Cord
Length
Wire Gauge (A.W.G.):
Up to 25 ft
(7.5 m)
+20 ft - 50 ft
(+7.5 m - 15 m)
14 12
m WARNING m
Electric shock may cause SEVERE INJURY or
DEATH. Heed these warnings:
• Do not allow any part of the log splitter to make
contact with water while it is in operation. If the
appliance becomes wet while turned o, wipe dry
before starting.
• Use only a UL-, CSA-, or ETL-rated extension cord for
outdoor, all-weather use.
• Do not use an extension cord over 50 ft (15m).
• Do not touch the appliance or its plug with wet hands
or while standing in water. Wearing rubber boots
oers some protection.
EXTENSION CORD CHART
Loading ...
Loading ...
Loading ...