© 2020 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
1
EN
A Division of Snow Joe
®
, LLC Model 24V-X2-OGV-CT Form No. SJ-24V-X2-OGV-CT-880E-M
OPERATOR’S MANUAL
R
2-IN-1 CORDLESS VACUUM +
MULCHER – TOOL ONLY
48V MAX* | 38 MPH MAX | 850 CFM MAX
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety WARNINGS!
When using this cordless vacuum + mulcher, basic safety
precautions should always be followed to reduce the risk of
re, electric shock and personal injury.
Before using the vacuum + mulcher, take the time to familiarize
yourself with the controls, especially how to stop the
machine in an emergency. The only individuals who should
use the vacuum + mulcher are those who have a thorough
understanding of the instructions and who know how to
operate the machine. Children should never be allowed access
to the vacuum + mulcher.
Retain this manual for future reference and reread it at the start
of each vacuuming/mulching session.
General Safety
1. Keep work area clean and well-lit – Cluttered, dark
areas invite accidents.
2. Replacement parts – When servicing this unit, use only
identical replacement parts.
3. Keep children, bystanders, and pets away – All
spectators, including pets, should be kept a safe distance
away from the work area.
4. Dress properly – Do not wear loose clothing or jewelry
as such articles can get caught in moving parts. Wear a
protective covering to contain long hair. Wearing rubber
gloves and substantial non-slip footwear is recommended
when working outdoors.
5. Prevent unintentional starting – Ensure the switch is o
before inserting battery packs, picking up or carrying the
appliance. Carrying the appliance with your nger on the
switch or energizing appliance that have the switch on
invites accidents.
6. Remove the battery packs from the appliance before
making any adjustments, changing accessories, or
storing appliance – Such preventive safety measures
reduce the risk of starting the appliance accidentally.
7. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it is designed.
8. Wear personal protective equipment – When using this
tool, wear safety glasses with side shields or goggles to
provide necessary eye protection. Wear ear defenders to
prevent hearing damage. Use a face or dust mask if the
work environment is dusty.
9.
Remove the batteries – Disconnect the vacuum + mulcher
from the power supply by removing the batteries when it is
not in use, before servicing it, when changing accessories,
and when performing any other maintenance task.
10. Store idle tool indoors – When not in use, the vacuum
+ mulcher should be stored indoors in a dry and high or
locked-up place out of the reach of children.
11. Maintain the vacuum + mulcher with care – Keep
cutting edges sharp and clean for optimal and safest
performance. Keep handles dry, clean and free from oil
and grease.
12. Use the right tool – Do not use the tool for any job except
that for which it is intended.
13. Avoid dangerous environments – Do not use the
vacuum + mulcher in rain, damp, or wet locations.
14. Stay alert – Watch what you are doing. Use common
sense. Do not operate the vacuum + mulcher when you
are tired or under the inuence of drugs, alcohol, or other
medication.
15. Do not overreach – Keep proper footing and balance at
all times.
16. Check Damaged Parts – Before further use of the
appliance, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition
that may aect its operation. A guard or other part that
is damaged should be properly repaired or replaced.
Contact the Snow Joe
®
+ Sun Joe
®
customer service
center at 1-866-SNOWJOE (1-866-766-9563) for
assistance.
Loading ...
Loading ...
Loading ...
