Loading ...
Loading ...
Loading ...
18
GB
TBOX-LUCE controls
Models with Touch control glass (basic)
HLB 9.8 LTI X - HLB 6.8 LT X
T1 T2 T3 T4 T5 T6 T7 T8
T1 motor ON/OFF

is set. When the button is pressed during operation, the

T2 Speed 1
When the button is pressed the hood switches from the
previous status to speed 1.
T3 Speed 2
When the button is pressed the hood switches from the
previous status to speed 2.
T4 Speed 3
When the button is pressed the hood switches from the
previous status to speed 3.
T5 Booster
When the button is pressed the hood switches from the
previous status to intense speed. The setting is limited by
time; when the time elapses the hood goes back to the speed
set previously; when a speed button is pressed )T2, T3 or
T4), the selected speed is set as you leave the booster mode.

The antigrease )A) and odour )B   
replacing after a certain number of hours of use )the latter

The time for cleaning/replacement is signalled by the


The LED is turned off by pressing the T7 button after

T8 lights ON/OFF
It turns the work lights of the hood on and off.


by pressing T5 and T6 for 6 seconds. T7 turns on at this
point to indicate the type of installation through two colours
of the LED: white for extractor installation )default), red for

by pressing T7 cyclically with the consequent alternation
of the LED colours.
Hood off
The hood can be turned off manually by pressing the T1
button )ON/OFF). If the timer is set, the hood turns off
automatically when the set time runs out.
Models with Touch control glass + display
(medium)
)Only available in certain models)
T1 T2 T3 T4 T5 T6
T1 motor ON/OFF

is set. When the button is pressed during operation, the

T2 Speed –
When the button is pressed the hood switches to the
previous speed.
T3 Speed +
If the hood is set to speed 3, the intensive speed activates
when this button is pressed
The setting is limited by time; when it elapses the hood goes
back to the speed set previously.
T4 Timer “–”
OFF the hood with the timer; if the timer
is set and the speed is subsequently changed by pressing
T2, T3 or T4, the timer is deactivated.
T4 to decrease the timer by 5 minutes.
T5 Timer “+”

to 5 minutes; this value is increased by 5 additional minutes
every time the button is pressed after that.
T6 lights ON/OFF
It turns the work lights of the hood on and off
D1I1 D2 I5
I2 I4
D1:
D2: Assembly of 2 DGT Time
I1:
I2:
I4: Menu Indicator
I5: Timer Indicator
T6 Timer
By pressing T6 once, a timer setting can be associated
to each speed V) [v1 – 30 min, v2 – 20 min, v3 – 10 min]
, after which the hood turns OFF automatically. The timer
can be set for manual speeds only and not for the booster.
Loading ...
Loading ...
Loading ...