Loading ...
Loading ...
Loading ...
4
ALWAYS make sure the unit is unplugged before beginning assembly. NEVER move
or clean the heater, or change the bulbs, while it is plugged in.
ALWAYS attach the feet before using. Never plug in or operate this unit if the feet are
not securely attached.
ASSEMBLY
A Phillips screwdriver is needed for assembly (not included).
1. Carefully turn the stove upside down and lay it on a clean and soft surface.
2. Insert the tab of one leg into the slot in the corner of the stove frame.
3. Thread two screws through the holes in the leg and into the stove frame. Partially
tighten the screws with a Phillips screwdriver. Do not overtighten the screws.
4. Repeat Steps 2 and 3 for the other three legs.
5. Check the alignment and tighten all 8 screws securely with a screwdriver. DO
NOT overtighten the screws.
Loading ...
Loading ...
Loading ...