TALK USB
MICROPHONE
SETUP
Connect USB-C to
Talk microphone.
Enter your PC or Mac settings to make sure connection is established.
SETUP TALK with PC / MAC
SETUP TALK WITH PC (WINDOWS 7, 8, or 10)
1. From the Start menu, select the Control Panel.
2. From the Control Panel, select the Sound icon.
3. Select the Recording tab and select “JLab Talk”.
4. Select the Playback tab and select “JLab Talk”.
SETUP TALK WITH MAC (macOS 10.10 or HIGHER)
1. Open System Preferences and select the Sound icon.
2. Select the Input tab and select “JLab Talk”.
3. Select Output tab and select “JLab Talk”.
4. From this screen, set the Output volume to desired level.
Connect to your PC
or Mac USB INPUT.
1
2
3
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
C
U
S
T
O
M
E
R
S
U
P
P
O
R
T
U
.
S
.
B
A
S
E
D
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
Reach out to us at [email protected]
or visit jlab.com/contact
REGISTER TODAY
jlab.com/register
Product updates | How-to tips
Shop products | Product alerts | Burn-in your headphones
JLab Store + Burn-in Tool
RECORDING
SETTING
BOTTOM
CONTROLS
MUTE ON / OFF
& RECORD
SWITCH
VOLUME / GAIN
CONTROL
CARDIOID
Record front
OMNI
Record all
surroundings
STEREO
Record left &
right channel
BIDIRECTIONAL
Record front &
back channel
3.5MM AUX
OUTPUT
USB-C INPUT
Press to switch
volume or gain.
Rotate wheel to
control the level.
Press to
mute/unmute.
IN USE
Correct
position
Incorrect
position
• The Talk works with almost any recording software installed on macOS, Windows, or Linux.
Review in your software’s setting and adjust accordingly.
• No additional drivers/software are needed for the Talk. Simply plug in and setup in device settings.
• Talk will not work through a power bank/battery pack. It will only work with USB-A input with an operating system.
JLAB.COM
