Loading ...
Loading ...
Loading ...
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2019
328
PO
SAVE THESE INSTRUCTIONS
English
Page 5
This product is specially designed for above ground pools. It will destroy the bacteria, oxidize
bather organics and control algae, which provide a safe, clean and comfortable swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chloride. During the
installation of your Ozone & Saltwater System, a measured quantity of salt is dissolved in the
pool water to make it slightly salty. The pool water flows through the Ozone & Saltwater System’s
electrolytic cell to produce chlorine. The chlorine dissolves in the water and instantly starts
destroying bacteria and algae. It also oxidizes all other organic materials.
Ozone is made by drawing air through Corona Discharge (CD) cells that break down oxygen
molecules, which then recombine into ozone molecules. Ozone gas is introduced to the pool
circulation line using a venturi injector. Water passing through the injector creates a suction that
pulls the ozone gas into the water. The ozone dissolves in the water. Ozone can oxidize some
contaminants and most bacteria.
HOW THE CHLORINE IS GENERATED
Power: 110 - 120 Volt AC
Amperage: 1.1A
Ideal Salt Level: 3000 ppm (parts per million)
Maximum Chlorine Output/hour: 11 grams/hour
Ozone Output: 150 mg/hour
Filter pump minimum flow rate: 1600 ~ 4000 gallons/hour
(6056 - 15140 liters/hour)
Limited Warranty: see “Limited Warranty”
HOW OZONE IS GENERATED
PRODUCT SPECIFICATIONS
Flow Sensor
Electrolytic Cell
Control Station
Hose from
Filter Pump
Hose Returning
Water to Pool
Loading ...
Loading ...
Loading ...