Loading ...
Loading ...
Loading ...
07
English English
08
③
Insert anchors into the holes, and fix the mount onto the wall with the
provided screws. No anchors are needed on wooden walls.
④
Clip the motion sensor back onto the mount.
⑤
Rotate the motion sensor to adjust the detection coverage.
USING THE MOTION SENSOR
After the motion sensor is installed, the alarm will be triggered once movement is
detected within the motion sensor’s coverage area.
When the motion sensor is working, its LED indicator shows as below:
LED Status Description
Blinking blue Movement detected while the HomeBase is connected
Blinking red Movement detected while the HomeBase is not connected
When the motion sensor is in the test mode, the LED indicator shows as below:
LED Status Description
Solid red Enter the test mode successfully
Blinking red for 1 second
Movement detected when the motion sensor is in the test
mode
Off Failed to enter the test mode
REPLACING THE BATTERY
When the motion sensor’s battery is low, the LED indicator shows as below. ou
should replace the battery to keep the motion sensor working.
LED Status Description
Blinking blue Movement detected while the HomeBase is connected
Blinking red Movement detected while the HomeBase is not connected
SPECIFICATIONS
Battery: 1× CR123A battery
Operating Temperature: -10ºC - 40ºC /14°F - 104°F
Storage Temperature: -20ºC - 60ºC /-4°F - 140°F
Loading ...
Loading ...
Loading ...