Sun Joe 20VIONLTE-ST11-RM 20-Volt iON Cordless Swath String Trimmer+Edger Kit 11-inch Auto Feed W/ 2.0-Ah Battery and Charger Certified Refrubished

User Manual - Page 9

For 20VIONLTE-ST11-RM.

PDF File Manual, 24 pages, Read Online | Download pdf file

20VIONLTE-ST11-RM photo
Loading ...
Loading ...
Loading ...
9
3. The edger guide + ower guard can be ipped up so it
stores against the motor housing for convenient storage,
when not in use (Fig. 6).
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read o the
battery charge level from the LEDs of the battery indicator:
All 4 level monitoring LEDs are lit: Battery charge level
is maximum.
3 level monitoring LEDs are lit: Battery charge level
is high.
2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
1 level monitoring LED is lit: Battery is at. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be
working, place the battery pack on the charger and charge as
needed.
Immediately after using the battery pack, the charge level
button may display a lower charge than it will if checked a few
minutes later. The battery cells “recover” some of their charge
after resting.
Charger Operation
mWARNING! Charge only EcoSharp
®
LITE iBAT20-LTE
lithium-ion battery packs in compatible EcoSharp
®
iCHRG20
lithium-ion battery chargers. Other types of batteries may
cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to ow
into the charger.
When to Charge the EcoSharp
®
LITE
iBAT20-LTE Lithium-Ion Battery
NOTE: The EcoSharp
®
LITE iBAT20-LTE lithium-ion battery
packs do not develop a "memory" when charged after only a
partial discharge. Therefore, it is not necessary to run down the
battery pack before placing it into the charger.
Use the battery charge indicator lights to determine when to
charge your EcoSharp
®
LITE iBAT20-LTE lithium-ion
battery pack.
You can "top-o" your battery pack's charge before starting
a big job or after a long day of use.
Fig. 5
Curved ends of
edger guide +
ower guard
Small hole on the
housing
Fig. 6
Charge level button
The battery is at 25% capacity
and requires charging
The battery is at 50% capacity
and requires charging soon
The battery is at 75% capacity
The battery is at full capacity
Light IndicatorsLights
Loading ...
Loading ...
Loading ...