Loading ...
Loading ...
Loading ...
7
ENJOY THE 2-IN-1
COFFEE PLUS
®
Your Coffee PLUS
®
system is designed to let
you use the coffeemaker and Hot Water System
separately or at the same time. It’s perfect for
every occasion.
PROGRAMMING YOUR
COFFEEMAKER
SETTING THE CLOCK
When the coffeemaker is plugged in, 12:00 will
flash in the display for 10 seconds, indicating the
unit is in Clock Set mode. If 12:00 stops flashing,
simply press and hold the Hour or Minute button to
return to flashing Clock Set mode.
SETTING HOURS AND MINUTES
Press either button to select the desired time.
Hold buttons down to scroll through the digits
quickly, or press and release to advance one digit
at a time. Be sure the PM indicator is on if setting
a PM time.
SETTING THE BREW START TIME
1. Press and hold the Prog Button
for 2 seconds.
The LED indicator and digital display will
flash the default (12:00) or previously selected
time. Follow directions under Setting the Clock
(above) to program your brew start time.
5 seconds after finishing, the unit will
automatically exit Auto On Setup mode and
the indicator light will illuminate, letting you
know automatic brew start is activated.
NOTE: To exit automatic brew start setup
mode, you can also just press the Prog
button again.
2. To activate automatic brew start using
previously selected time:
Press the Prog button. Previously set time will
appear and indicator will light up. Display will
return to clock setting. The Brew/Off/Auto Off
indicator light will come on when brew cycle
begins. The indicator light will turn off when
the keep warm cycle ends.
3. To deactivate automatic brew start:
Press illuminated Prog button; light will
go off, indicating mode is turned off.
SETTING THE AUTO OFF TIME
1. Press and hold the Brew/Off/Auto Off
button for 2 seconds.
The LED indicator and digital display will
flash the programmed Auto Off default (2:00)
or previously selected time. Follow directions
under Setting the Clock to program
coffeemaker to shut off from 0 to 4 hours
after brew cycle is finished.
2. To exit/confirm Auto Off time setting:
Do not touch any buttons. Auto Off setup
mode will be exited automatically after
5 seconds.
NOTE: Once the coffeemaker enters the
keep warm cycle, the Carafe Temp button
will illuminate. Press Carafe Temp button to
adjust warming plate temperature to Low,
Medium or High to keep freshly brewed
coffee at the temperature you prefer.
NOTE: This can also be done before or
during brewing.
BEFORE FIRST USE
We recommend flushing out both the
coffeemaker and Hot Water System before
first use.
Coffeemaker: Fill the reservoir with cold water
and follow the directions for Brewing Coffee.
DO NOT ADD COFFEE!
Hot Water System: Fill the reservoir to the
max fill line and follow directions under.
“Using the Hot Water System”.
Once the system flush is complete, your
Coffee PLUS
®
system is ready to brew and
heat water so you can enjoy Cuisinart at
its best!
Loading ...
Loading ...
Loading ...