Loading ...
Loading ...
Loading ...
Manual Door Handing
10 / 11 © 2017 Spectrum Brands, Inc.Kwikset: 1-800-327-5625 • www.kwikset.com
1 Remove battery pack. 3 Press the Program
button once more.
2 Press and HOLD the
Program button while
reinserting the battery pack.
Release button once battery
pack is installed. The status
LED will lash red and green.
4 The latch bolt will extend and retract to learn the
orientation of the door.
2 Press and HOLD the
Program button while
reinserting the battery pack.
Keep holding the button for
30 seconds until the lock
beeps and the status LED
lashes red.
Status
LED
If the touchscreen indicates a failure, see the online Premis User
Guide at www.kwikset.com/support/guides/premis-user.
Success Failure
If needed, the door handing process can be initiated manually.
This is useful if the lock is being moved to a di erent door.
Three methods are available to reset your
Premis lock, depending on your needs:
1 Remove battery pack.
4 After a few seconds, the lock will initiate the door handing process, and the latch
bolt will extend and retract to learn the orientation of the door.
Resetting the Lock
3 Press the Program
button once more. The
status LED will lash
green and red several
times.
3. Factory Reset
A factory reset will do the following:
1. Network Reset
A network reset will do the following:
• Remove the lock from your Premis app and HomeKit system.
All users and schedules will still be in place after a network reset. They
will be rediscovered by the Premis app once you pair the lock again.
From the Premis App:
Follow the instructions in the Premis app
to delete your lock.
From the lock:
Press and hold Button “A” on the back panel
for 7 seconds, until the lock beeps one time.
2. System Reset
A system reset will do the following:
• Remove the lock from your Premis app and HomeKit system.
• Remove all users, schedules, and user codes that were added inside the app.
• Remove all user codes that were programmed directly at the lock.
• Disable Auto-Lock.
• Turn on the Status LED if it was turned o inside the Premis app.
• Re-enable SecureScreen if it was disabled inside the Premis app.
• Unmute sound if it was muted from the Premis app.
To perform a system reset, press and hold Button “A” on the
back panel for 20 seconds. The lock will beep after 7 seconds.
Keep holding until you hear a second beep.
• Remove the lock from your Premis app and HomeKit system.
• Remove all users, schedules, and user codes
that were added inside the app.
• Remove all user codes that were
programmed directly at the lock.
• Disable Auto-Lock.
• Turn on the Status LED if it was turned
o inside the Premis app.
• Re-enable SecureScreen if it was
disabled inside the Premis app.
• Unmute sound if it was muted from the Premis app.
• Initiate the door handing process
Follow the instructions below to perform a factory reset:
Loading ...