Loading ...
Loading ...
Loading ...
28
remote control. From now on the appliance
will be driven by the APP.
READ-ONLY MODE → To switch from remote
control to read-only mode, press the
“Program” key. The display shows RD for 5
seconds (during these 5 seconds the "Temp C"
key must be disabled). After 5 seconds, the
wine cooler programme will be set to "Red
Wine" with the last temperature selected or
the default temperature if the temperature
has never been set differently. The LED will be
a second on and 3 seconds off.
WI-FI RESET → the Wi-Fi function can be reset
only when the appliance is in read-only mode.
To reset the Wi-Fi, press the "programme" and
the "Temp C" keys together for 5 seconds. The
LCD will show "RR" and the appliance will go
back to the last selected programme showing
the temperature. All connection data will be
deleted from the device. This means that the
whole enrolment procedure will have to be
repeated. The Wi-Fi LED will turn off.
BLACK OUT → in the event of a black out, the
appliance will go into read-only mode the next
time it is turned on.
Additional remarks:
- when the appliance tries to connect to the
router, the Wi-Fi LED will blink for 3 seconds.
This condition will occur if the router signal is
lost.
- when the appliance is off, the Wi-Fi module is
off, but if the enrolment has been successfully
completed, the appliance stores all the data
recorded for the next power on.
WI-FI functions
After Wi-Fi enrolment, the consumer can use
Hoover's wizard app to remotely control the
programme, temperature and light. Selecting
the specific programme or the temperature
the display will update the status in terms of
LED and number. For further details check the
specific functions of the APP.
Shelves
Shelf is chrome plated or wooden wine rack.
To accommodate different size bottles, they
can be moved up or down by sliding them out
the tracks first. Shelves are designed to
accommodate maximum amount of bottles.
Wine Rack
There is an additional wine rack at bottom
section of the unit where you can store up to 6
wine bottles. This rack is removable for
cleaning purpose.
There is a 4 to 6 C variance between the top
and bottom shelves of the wine chiller.
Therefore, If you have set the wine chiller for
red wine only and you want to place a mix of
white and red wines, you should place the
white wine bottles on the bottom shelves and
the red wines on the top shelves.
CARE AND MAINTENANCE
Cleaning Your Wine Cooler
• Unplug the wine cooler and remove the
bottles.
• Wash the inside with a warm water and
baking soda solution. The solution should be
about 2 tablespoons of baking soda to a liter
of water.
• Wash the shelves and trays with a mild
detergent solution.
• The outside of the wine cooler should be
cleaned with mild detergent and warm
water.
• It may also be necessary to periodically wipe
the bottom part of the storage area, as the
wine cooler is designed to retain humidity,
and condensation may collect there.
Maintenance of Your Wine Cooler
Power Failure
Most power failures are corrected within a few
hours and should not affect the temperature
of your wine cooler if you minimize the
number of times the door is opened. If the
power is going to be off for a longer period of
time, you need to take the proper steps to
protect your contents.
Vacation Time
During long absences, remove all the bottles;
unplug your wine cooler, clean your wine
cooler, and leave the door open slightly to
avoid possible formation of condensation,
mold, or odors.
Moving Your Wine Cooler
• Remove all the bottles.
Loading ...
Loading ...
Loading ...