Sun Joe 24V-PS8-CT 24-Volt IONMAX Cordless Telescoping Pole Chainsaw , 8-Inch, Tool Only

OPERATOR’S MANUAL - Page 13

For 24V-PS8-CT.

PDF File Manual, 72 pages, Read Online | Download pdf file

24V-PS8-CT photo
Loading ...
Loading ...
Loading ...
13
3. To remove the chain saw head, release the On/O trigger
switch and remove the battery. Unlock the assembly lock.
Push the lock tabs on both sides, and pull the chain saw
head out (Fig. 14).
Operation
Starting and Stopping
In order to operate this cordless pole chain saw you will
need an 24V iON+ System battery and charger.
See page 21 for battery and charger options and
specications, or for more information visit sunjoe.com.
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
1. Slide the battery into the battery compartment until it
clicks to lock it into position (Fig. 15).
2. To turn the pole chain saw ON, push and hold the safety
lock switch (located on the handle) forward with your
thumb and then squeeze the On/O trigger switch with
your ngers. Once the tool is running, you can release the
safety lock switch (Fig. 16).
3. To turn the tool OFF, release the On/O trigger switch
(Fig. 16).
Adjusting the Telescoping Pole
This machine is equipped with a telescoping pole which
provides up to 14 ft (4.3 m) of overhead reach. To adjust the
telescoping pole, follow the instructions below.
1. Disconnect the saw from the power supply by removing
the battery from the compartment.
2. Unclip the telescoping lock to release the pole. Extend the
pole to the desired length (Fig. 17).
NOTE: Push poles toward each other to shorten the pole
or pull them away from each other to lengthen the pole.
Only extend the pole to the minimum length required to
reach the limb.
3. Lock the pole in position by closing the telescoping lock
(Fig. 18), and ensure that the pole is secured.
mWARNING! Failure to lock the telescoping lock as
directed could result in personal injury.
Adjusting the Multi-Angle Head
The pole chain saw head can be rotated for dierent cutting
angles for 0º, 15º, and 30º (Fig. 19). Follow the below
instructions to adjust angles.
Fig. 15
Battery
Fig. 16
On/O trigger switch
Safety lock
switch
Fig. 17
Pull Pull
Telescoping lock
Fig. 18
Telescoping lock
Fig. 19
15º
30º
Loading ...
Loading ...
Loading ...