Loading ...
Loading ...
Loading ...
1 DESCRIPTION
1.1 PURPOSE
The machine is used to cut all types of wood.
1.2 OVERVIEW
Figure 1.
1
Lock-off button
2
Switch trigger
3
Spindle lock button
4
Laser guide
5
Edge guide
6
Bevel adjustment
knob
7
Width adjustment
knob
8
Blade guide notch
@ 45°
9
Blade guide notch
@ 0°
10
Blade
11
Lower guard
12
Outer flange
13
Blade bolt
14
Base
15
Lower guard lever
16
Depth adjustment
lever
17
Hex key
2 SAFETY
WARNING
Make sure that you do/obey all safety instructions.
Refer to Safety Manual.
3 INSTALLATION
3.1 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine
before use.
WARNING
• If the parts have damage, do not use the machine.
•
If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5.
Discard the box and package in compliance with
local regulations.
3.2 INSTALL THE BATTERY PACK
Figure 2.
WARNING
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
1. Align the lift ribs on the battery pack with the
grooves in the battery compartment.
2. Push the battery pack into the battery compartment
until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
3.3 REMOVE THE BATTERY PACK
Figure 3.
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
3.4 INSTALL THE BLADE
Figure 4.
NOTE
Before you install the blade, remove the battery pack
and keep the inner flange on the spindle.
1. Use the lower guard lever to lift the lower guard and
hold the lever.
2.
Install the new blade.
3.
Put the outer flange and the blade bolt on the
spindle.
4.
Use the hex key to tighten the bolt
counterclockwise.
5.
Push the spindle lock button to tighten the blade.
NOTE
The arrow on the blade points the same direction as
the arrow on the top guard.
3.5 REMOVE THE BLADE
Figure 5.
NOTE
Before you remove the blade, remove the battery
pack.
1. Push the spindle lock button to lock the spindle.
2. Use the hex key to loosen the blade bolt clockwise.
3. Remove the bolt and outer flange.
5
English
EN
Loading ...
Loading ...
Loading ...