Loading ...
Loading ...
Loading ...
11
Replacing the belt
•
The belt is a consumable part. Replace the belt if the speed of
playback slows down or irregular rotation occurs. As a rule of
thumb, we suggest replacing the belt once a year.
•
Before replacing the belt, be sure to disconnect the product’s
AC adapter from the outlet.
1. Remove the felt mat.
2. Remove the platter, turn the platter over, and then remove
the old belt.
•
Place your thumbs in the openings and pull up strongly.
3. Place the new belt around the inner circle.
•
Be careful not to twist the belt while doing this.
4. Attach the platter.
•
Align one of the openings with the position of the motor
pulley (brass-colored).
Replacing the belt
5. Place the belt on the motor pulley (brass-colored).
•
Grasp the belt that was attached in step 3 and, while
pulling it, place it on the brass motor pulley.
6. Using your hands, rotate the platter ten times.
•
Slowly rotate the turntable ten times by hand in the
direction of the arrow.
When the turntable is moved
Using the product's original packing materials, wrap the
turntable in the reverse order from when you unwrapped it. If
you do not have the packaging materials, take the following
measures:
•
After disconnecting the AC adapter from the outlet, remove
the felt mat and platter, and then wrap them so that they do
not get damaged.
•
Attach the protector to the cartridge.
•
Use a string or something similar to tie the tonearm to the
rest so that it does not move.
•
Wrap the turntable body with paper or a soft cloth so that it
does not get damaged.
AT-L P60XBT
Belt
Opening Motor pulley (brass-colored)
Place the belt
Motor pulley
(brass-colored)
Loading ...
Loading ...
Loading ...