Loading ...
Loading ...
™
3
Repairs and Maintenance Notes:
(1) Keep fan in a dry environment
(2) Do not use water or any other liquid cleaning agent, use only a clean brush or a clean dry
cloth to wipe away any loose dirt or dust
(3) Under normal operating conditions, the fan should be cleaned every six months
(4) To extend fan life, it is recommended that air filters and one-way valves be installed on the
fan’s inlet and outlet
7. Warning
•
Can not be used in coal mine wells which have methane mixed gas and coal dust
explosion hazard
•
Avoid impact or physical damage of the unit as it will cause premature failure. Should
be stored at and used for those places where have no strong impact force and shock
•
Keep fan in a dry environment. Can not be used for those places where corrosive
gas or steam exist
•
No waveform and current input allowed which may cause damage on motor
enameled wire and shorten its service life
•
In the transmission of air, or any other non-corrosive medium, inlet temperature must
not exceed 80C. The amount of dust and other solid contaminant should not exceed
100g per cubic meter. Avoid viscosity and fiber material
•
If the product had been in storage for more than six months, insulation resistance
must be tested before use. Resistance to ground should be 20MΩ or more
•
Stay away from children