Loading ...
Loading ...
Loading ...
16
EN
ERROR MESSAGES
E1
Open circuit on the hot
conductor
The hot conductor is damaged, has a poor contact,
has fallen off or is disconnected. Contact a
specialist company for repair.
E2
Short circuit on the hot
conductor
The hot conductor is damaged or has been short-
circuited. Contact a specialist company for repair.
E3
Device runs dry The built-in dry-running protection has reset the unit
due to excessive temperatures. Please check that,
if viscosity of liquid is too high, it must be stirred
regularly especially in area of temperature sensor
to avoid thermostat issues. Press on the reset pin on
the bottom of the boiler. When a sound is heard, the
boiler is ready for operation again
E4
Temperature at sensor
too high
The temperature in the boiler rises by more than
30°C in one minute or too little water in the boiler.
Please check that, if viscosity of liquid is too high,
it must be stirred regularly especially in area of
temperature sensor to avoid thermostat issues and
more water may need to be added. Press on the
reset pin on the bottom of the boiler. When a sound
is heard, the boiler is ready for operation again.
Loading ...
Loading ...
Loading ...