Loading ...
Loading ...
Loading ...
6
Unpacking
Carton Contents
• Container lid
• Metal container
• Pre-lter
• Flexible metal suction hose
• Aluminium suction tube
• Wire lter basket with pleated lter
• Manual with registration card
1. Carefully remove the ash vac and check to see that all of
the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new ash vac.
The packaging is made of recyclable materials. Properly
dispose of these materials in accordance with local
regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suocation risk!
Assembly
m
DANGER! Never start the motor before installing the
pleated lter and the wire lter basket.
mWARNING! To avoid serious personal injury, read and
understand all safety instructions provided.
mWARNING! Before performing any maintenance, make
sure the tool is unplugged from the power supply and the On/
O switch is turned o. Failure to heed this warning could
result in serious personal injury.
Fitting the Pre-Filter
The coarse-dust pre-lter is made of a specially designed
glass fabric cloth that eectively lters approximately 95%
of coarse-dust particles. Installing the pre-lter correctly
will reduce the cleaning of the pleated lter and prolong the
pleated lter lifetime.
1. Check that the wire lter basket and the pleated lter
(inside of the wire lter basket) are securely mounted in
the correct position (Fig. 1).
2. Insert the pre-lter into the ash vacuum metal container,
aligning the PVC edge of the lter with the rim of the
container (Figs. 2 – 3).
Fig. 1
Pre-lter
Fig. 2
Fig. 3
Pre-lter
PVC edge
Loading ...
Loading ...
Loading ...