ACTION 2 User Manual

Loading ...

DJI Action 2 User Manual

Not nal

Warnings

1. DJI Action 2 contains magnets. Keep the camera away from magcards, IC cards, hard disks, RAM

chips, implantable medical devices such as pacemakers, and other devices to avoid interference.

2. The lens cap and expansion port may become hot during use. To avoid scalding, DO NOT touch.

3. DO NOT attach the camera unit to the front touchscreen module when there is any dust or liquid on

the expansion ports. Otherwise, the camera may corrode or short-circuit.

4. The front touchscreen module and the power module are not waterproof. The waterproof case is

required when using the front touchscreen module or the power module with the camera unit under

water.

5. Charge DJI Action 2 when the battery level is low. Storing the DJI Action 2 for more than four months

with low battery will reduce the battery life. Charge or discharge the DJI Action 2 battery to 40-60%

if it will not be used for 10 days or more.

6. When attaching DJI Action 2 to the roof or window of a car, the DJI Action 2 may fall off if the

car travels too fast, the surface is not clean, or there is bad weather such as high winds or a

thunderstorm.

7. For better audio quality, DO NOT block the microphone when recording video.

8. Connect the camera unit to the front touchscreen module to enable audio during playback. DO NOT

block the speaker. Otherwise, the audio performance may be aected.

Preparing

Activation

When using the camera unit, activation is required through DJI Mimo. Follow the steps below to activate.

1. Press and hold the power/record button to power on.

2. Enable Wi-Fi and Bluetooth on the mobile device.

3. Launch DJI Mimo, tap , and follow the instructions to activate the camera unit.

Device

DISCOVERY

ACADEMY

Ronin-SC - Longboard Danc…

Warren Davidson #Pano Mode

FOR YOU

9:41

TEMPLATE

SUPPORT

COMMUNITY

Home Edit MeAlbum

发现

学院

Device

9:41

Loading ...

Dji ACTION 2 4K Action Camera