Loading ...
Loading ...
Loading ...
Amazon COVID-19 Test Collection Kit Instructions for Use
I registered my kit.
If you have not registered your kit please go back to
section 1.
I collected a sample from both nostrils.
The nasal swab only touched my nostrils.
I did not spill the fluid in the collection tube.
Put tube inside the plastic
bag
Put the capped collection tube inside
the plastic bag with the absorbent pad.
Release excess air from the bag and seal
it shut.
Clean the sample collection surface area
with a disinfectant.
Prepare your box for return
shipping
The return box must be used to ship
your sample to the lab.
Check your box to make sure corners
are not damaged and sides have no
tears or holes.
Put your sealed plastic bag with your
collection tube in the box. Close box
and seal with tape.
!
Ifyoumissanytestingstepsyourresultsmaybeinaccurate
or result in an error. If you have missed steps please discard
kit components and clean your area. Get a new kit at your
earliest convenience by visiting AmazonDx.com/FAQs.
Before sending your sample to the lab
If you cannot check all of the boxes below, your sample
cannot be processed.
4
Send sample to lab
3
Checklist
!
Discardtheouterboxthatyoureceived
your kit in.
!
Donotremovetheabsorbentpadfrom
the plastic bag.
Page 4 of 5
Loading ...