Loading ...
Loading ...
Amazon COVID-19 Test Collection Kit Instructions for Use
Put swab in collection tube
soft tip down
To break off the swab handle, hold the
tube firmly. Bend the swab handle at the
indicator line back and forth against the
collection tube until it breaks. Discard the
handle.
Recap the collection tube
Make sure the lid is on tight, so no fluid
can spill out. If the collection tube leaks
your sample cannot be processed.
Wash your hands or use hand sanitizer if
there is no sink.
Repeat in other nostril
In your other nostril using the same swab,
rub the swab slowly at least 4 times
taking about 15 seconds.
Swab first nostril
Insert the soft tip of the swab ½ - ¾
inch inside your nostril. Rub the swab in
a slow circular motion against the inside
walls of your nostril at least 4 times.
This should take about 15 seconds.
Remove the lid from the
collection tube
Put the tube lid on a clean surface
nearby, with the lid top facing down.
Put the collection tube in the tube holder
provided in the box to avoid spilling fluid.
Open the swab pouch
Peel back the tab on the handle end to
remove the nasal swab from the pouch.
Hold by the handle, do not touch the
soft tip. Discard the swab pouch.
½” - ¾”
½” - ¾”
!
Do not touch the soft tip of the swab
to any surface other than inside your
nostrils.
!
Do not spill the fluid in the collection
tube! If you spill the fluid, clean the area
and discard your kit components.
Page 3 of 5
Loading ...
Loading ...