i
Important Safety Information
Improper handling can cause serious damage to the EdgeStar outdoor beverage refrigerator
and / or injury to the user. This outdoor beverage refrigerator is designed for domestic indoor
use only. Do not use the unit for industrial or commercial use. Any other use may
invalidate the warranty. Please review the ratings label located on the rear panel of the unit for
electrical and other technical data related to this unit. The unit must be used in a properly
grounded wall outlet.
Please read and follow the safety information listed below to reduce the risk of fire,
electric shock, or injury.
Electrical Safety
• This unit must be protected from the elements such as dirt, dust, sand, rain, sleet, snow, and / or
moisture.
• Do not exceed the power outlet ratings.
• It is recommended the refrigerator be connected on its own circuit.
• The unit must be installed in accordance with state and local electrical codes.
• A standard electrical supply (115 V, 60Hz), that is properly grounded in accordance with the
National Electrical Code and local codes and ordinances is required.
• Use outlets that cannot be turned off by a switch or pull chain.
• Unplug the unit if you are going to clean it or when it is not going to be used for an extended period
of time.
• Do not operate the unit with a power plug missing the ground plug, a damaged cord, or a loose
socket. If the power cord is damaged, it must be replaced by the manufacturer or a qualified
technician.
• Be sure the outdoor beverage refrigerator is properly grounded.
• Never plug or unplug the unit with wet hands.
• Do not bypass, cut, or remove the grounding plug.
• Do not use extension cords or power strips with this unit. You may need to contact your electrician if
it is necessary to use a longer cord or if you do not have a grounded outlet. Do not modify the
power cord’s length or share the outlet with other appliances.
• Do not start or stop the unit by switching the circuit’s power on and off.
• Never repair the unit while it is plugged in.
• Immediately unplug the unit if it makes strange sounds, emits smells, or smoke comes out of it, and
contact customer service.
• Do not remove any part of the casing unless you are instructed to do so by an authorized
technician.
• You should never attempt to repair the unit yourself.
• Contact customer service for service options if the unit needs service.
ii
Note: This owner’s manual is provided for reference use only. Specifications may change
without prior notice. Refer to the product label on the back of your outdoor beverage
refrigerator for the latest technical information.
General Safety
• To prevent back and other types of injuries, use at least two people to move and install the unit.
• This appliance is not intended for use by persons, including children, with reduced physical, sensory
or mental capabilities, unless they have been given supervision or instruction concerning the use of
the appliance by the person(s) responsible for their safety.
• Install the outdoor beverage refrigerator in a well-ventilated area where the ambient temperature is
above 40° F and below 100° F.
• The temperature range for this cooler is optimized for beverage storage. Perishable food items may
require a different storage environment.
• Do not place hot or warm items into the cooler before they cool down to room temperature.
• In a rainy environment, a water-proof covering is recommended.
• This unit is not intended to be used by children.
• Children should be supervised to ensure that they do not play with this product.
• Never allow children to crawl inside the appliance. If you are disposing of the unit, remove the door.
• Do not use this appliance near flammable gas or combustibles, such as gasoline, benzene, thinner,
etc.
• Only use in an upright position on a flat, level surface and provide proper ventilation.
• Do not pinch or kink the power supply line between the unit and cabinet.
• Do not leave any cleaning solutions in the unit.
• Do not use solvent-based cleaning agents or abrasive solutions to clean the unit as they may
damage the interior and exterior.
• Do not place any other appliances on top of the unit.
• Do not turn the unit upside down, on its side, or at an angle off level.
• If your model of refrigerator is equipped with a lock, take care to keep the keys away from children.
• Do not move the unit without emptying the contents and securing the door in a closed position.
iii
Table of Contents
IMPORTANT SAFETY INFORMATION……………………………………………………………………………………... I
TABLE OF CONTENTS……………………………………………………………………………………………………….. III
FIRST TIME OPERATING INSTRUCTIONS…………………………………………………………………………………………. 4
INTRODUCTION……………………………………………………………………………………………………………….. 4
PARTS IDENTIFICATION…………………………………………………………………………………………………….. 5
FRONT VIEW……………………………………………………………………………………………………………………….5
REMOVING THE SHELVES………………………………………………………………………………………………….. 6
INSTALLING THE OUTDOOR BEVERAGE REFRIGERATOR………………………………………………………….. 6
UNPACKING THE OUTDOOR BEVERAGE REFRIGERATOR………………………………………………………………………. 6
TYPES OF INSTALLATION…………………………………………………………………………………………………………. 6
Freestanding Installation……………………………………………………………………………………………………… 6
Built-in Installation……………………………………………………………………………………………………………….6
INSTALLATION CLEARANCE REQUIREMENTS…………………………………………………………………………………….. 7
ELECTRICAL REQUIREMENTS……………………………………………………………………………………………………. 8
Recommended Grounding Method…………………………………………………………………………………………… 8
LEVELING THE OUTDOOR BEVERAGE REFRIGERATOR………………………………………………………………………….. 8
INSTALLATION CHECK LIST BEFORE OPERATION……………………………………………………………………………….. 9
OPERATION……………………………………………………………………………………………………………………. 10
CONTROL PANEL OVERVIEW…………………………………………………………………………………………………….. 10
USING THE TEMPERATURE CONTROL PANEL…………………………………………………………………………………… 10
Adjusting the Temperature…………………………………………………………………………………………………….. 11
Interior Light……………………………………………………………………………………………………………………... 11
Alarm Mode Indicator…………………………………………………………………………………………………………... 11
Compressor Run Indicator…………………………………………………………………………………………………….. 11
Control Panel LCD……………………………………………………………………………………………………………… 11
NORMAL SOUNDS………………………………………………………………………………………………………………… 12
DEFROSTING……………………………………………………………………………………………………………………… 12
PREPARING THE BEVERAGE REFRIGERATOR FOR STORAGE…………………………………………………………………… 12
CLEANING AND MAINTENANCE…………………………………………………………………………………………… 13
EXTERIOR CLEANING…………………………………………………………………………………………………………….. 13
INTERIOR CLEANING……………………………………………………………………………………………………………… 13
TROUBLESHOOTING………………………………………………………………………………………………………… 14
SPECIFICATIONS……………………………………………………………………………………………………………… 16
EDGESTAR LIMITED WARRANTY…………………………………………………………………………………………. 17
4
First Time Operating Instructions
Before use, make sure all packaging labels and materials are all removed from the unit. Be sure
to keep track of all included parts and pieces before discarding packaging materials. It is advised
that you keep the original box and packaging materials in case you are ever to move or ship the
appliance in the future.
Let the unit stand for at least 24 hours before you use it; this allows the cooling components time
to settle from transit. The instruction manual should be read before use.
Introduction
Thank you for purchasing this EdgeStar outdoor beverage refrigerator. We hope that this purchase
will be the beginning of a lasting and rewarding relationship between you and EdgeStar. We will
provide the customer support and exemplary products necessary to nurture that relationship.
This manual contains important information regarding the proper installation, use and
maintenance of your outdoor beverage refrigerator. Following this manual will ensure that your
product will work at its peak performance and efficiency.
Please save the original product packaging in case you need to safely transport your outdoor
beverage refrigerator.
For Your Records:
Please write down the model number and serial number below for future reference.
Both numbers are located on the ratings label on the back of your unit and are needed
to obtain warranty service. You may also want to staple your receipt to this manual as it
is the proof of your purchase and is also needed for service under your warranty.
Model Number:
Serial Number:
Date of Purchase:
For a more efficient experience, please do the following before contacting customer service:
• If you received a damaged product, immediately contact the retailer or dealer that sold you
the product.
• Read and follow this instruction manual carefully to help you install, use, and maintain your
outdoor beverage refrigerator.
• Read the troubleshooting section of this manual as it will help you diagnose and solve
common issues.
• Visit us on the web at http:/www.edgestar.com to register your product, download product
guides, and access additional troubleshooting resources and up-to-date information. You can
also find an interactive self-diagnostic tool at https://support.edgestar.com
• If you need warranty service, our friendly customer service representatives are available via
email at [email protected].
5
Tip: Gather the model and serial number from the product label and write them down before
installing the outdoor beverage refrigerator.
Parts Identification
Back View
Front View
6
Warning: Use two or more people to move and install the outdoor beverage refrigerator.
Failure to do so can result in back or other injury. Carefully remove the packaging materials.
Remove any shipping tape and glue from your outdoor beverage refrigerator before use. Do
not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the surface of your outdoor beverage refrigerator.
Important: Do not remove any safety, warning, or product information labels from your outdoor
beverage refrigerator.
Internal Fan
This unit is equipped with an internal fan that maintains a consistent internal temperature.
Installing the Outdoor Beverage Refrigerator
The outdoor beverage refrigerator should be installed in accordance with local electrical code
requirements. The refrigerator should also be placed in a location that is strong enough to
support its total weight, keeping in mind that it will weigh substantially more when fully loaded
than when empty. Before you plug the beverage refrigerator into a power supply, be sure
to let it stand upright for at least 24 hours to allow the compressor’s oils to settle.
Unpacking the Outdoor Beverage Refrigerator
Types of Installation
This outdoor beverage refrigerator has been designed for freestanding or built-in installation. In
each case, there must be adequate ventilation and access for service.
Freestanding Installation:
A freestanding installation will allow you to install the outdoor beverage refrigerator in almost
any place you desire. You must follow the stated instructions for electrical requirements, and
leveling the outdoor beverage refrigerator.
Built-in Installation:
A recessed installation will allow you to install the beverage cooler under a counter or in a
kitchen cabinet provided the required clearance space around the beverage cooler is
fulfilled. It is necessary to allow adequate ventilation space around the unit, including the
back. The following additional items must be observed:
1. Place the outdoor beverage refrigerator in front of the installation location. Adjust the
feet and place the unit flat on the floor or on a platform depending on your installation
requirements.
2. If the electrical outlet for the outdoor beverage refrigerator is behind the cabinet, plug
in the outdoor beverage refrigerator.
3. Push the outdoor beverage refrigerator into position.
Warning: Do NOT install the outdoor beverage refrigerator behind a closed cabinet door.
7
Important Notes:
• Choose a location that has ambient temperatures above 40° F and below 100° F. Operation
outside these temperatures may result in lowered efficiency or cause other adverse effects.
• This unit MUST be installed in an area protected from the elements, e.g. dust, sand, rain,
water spray or drips, sleet, and snow.
• In a rainy environment, a water-proof covering is recommended.
Installation Clearance Requirements
When installing the outdoor beverage refrigerator under a counter, follow the recommended
spacing dimensions shown.
• To ensure proper service access and ventilation, allow at least
1
/
2
” clearance at the back, 1”
at the top and
1
/2” at the sides. The installation should allow the unit to be pulled forward for
servicing, if necessary.
• The outdoor beverage refrigerator should be installed on a firm and level surface that will
be able to support the entire weight of a fully loaded unit. It is important for the outdoor
beverage refrigerator to be level in order to work properly. If needed, you can adjust the
height of the outdoor beverage refrigerator by rotating the feet. See the “Leveling the
Outdoor Beverage Refrigerator” section.
• A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with
National Electrical Code and local codes and ordinances, is required.
8
ELECTRIC SHOCK HAZARD!
• Plug into a grounded 3-prong outlet.
• Never remove the grounding prong from the plug.
• Never use an adapter to bypass the grounding prong.
• DO NOT use an extension cord.
• Failure to follow these instructions can result in fire, electrical shock, or death.
Important: Once you are ready to install it in a cabinet or directly on the floor, you must adjust
the feet to level the outdoor beverage refrigerator.
Electrical Requirements
Before you move your outdoor beverage refrigerator into its final location, it is important to
make sure you have the proper electrical connection:
A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National
Electrical Code and local codes and ordinances, is required.
It is recommended that a separate circuit, serving only your outdoor beverage refrigerator, be
provided. Use receptacles that cannot be turned off by a switch or pull chain.
The fuse (or circuit breaker) size should be 15 Amps.
Recommended Grounding Method
For your personal safety, this appliance must be grounded. It is equipped with a power
supply cord that has a 3-pronged grounding plug. To minimize possible shock hazard, the
cord must be plugged into a mating 3-pronged wall socket and grounded in accordance with
the National Electrical Code and local codes and ordinances. If a mating wall socket is not
available, it is the personal responsibility of the customer to have a properly grounded, 3-
prong wall receptacle installed by a qualified electrician.
Leveling the Outdoor Beverage Refrigerator
It is important for the refrigerator to be leveled in order to work properly. It
can be raised or lowered by rotating the plastic sheaths around each of the
feet on the bottom of the machine. If you find that the surface is not level,
rotate the feet until the outdoor beverage refrigerator becomes level. You
may need to make several adjustments to level it. We recommend using a
carpenter’s level to check the machine.
1. Place a carpenter’s level on top of the product to see if the refrigerator is
level from front to back and side to side.
2. Adjust the height of the feet as follows:
Turn the leveling feet to the right to lower that side of the refrigerator.
Turn the leveling feet to the left to raise that side of the refrigerator.
9
Installing and Removing the Shelves
To prevent damaging a door gasket, make sure to open the door all the way before pulling the
shelves out of their track.
To Install the Shelves:
1. Open the door completely.
2. Place the back of the shelf onto the shelf track with the front of the shelf elevated at a 45°
angle.
3. Slowly slide the shelf back on the shelf track until it stops.
4. Gently place the front of the shelf down.
To Remove the Shelves:
1. Open the door completely.
2. If necessary, make sure you remove all the contents sitting on the shelf.
3. Pull the shelf forward until it stops.
4. Lift up the front of the shelf and remove it from the unit.
5. Continue to pull the shelf forward until it is completely removed from the inner
compartment.
Installation Check List Before Operation
1. Have all packing materials and tape been removed from the interior and exterior of the
outdoor beverage refrigerator?
2. Have the installation instructions been followed, including connecting the machine to
electricity, and has proper grounding been installed for the outdoor beverage refrigerator?
3. Has the machine been leveled?
4. Is the outdoor beverage refrigerator in a site where the ambient temperature is between
40° F and 100° F all year round?
5. Is the unit installed in an area protected from the elements, e.g. dust, sand, rain, water
spray or drips, sleet, and snow?
6. Is there a clearance of at least ½” at the rear, 1” at the top, and ½” at the sides for proper
air circulation?
10
Operation
Control Panel Overview
Using the Temperature Control Panel
The outdoor beverage cooler turns on automatically when it is plugged in. This unit has a
temperature range from 38° F to 65° F. Allow at least 24 hours before storing your beverages
and to allow the temperature to acclimate.
Button
Function
Light
This button is used to turn the interior light on or off.
Set Temperature
This button is used to adjust the temperature.
Up
This button increases the set temperature in 1 degree increments.
Down
This button decreases the set temperature in 1 degree increments.
Indicator
Function
Alarm Mode Indicator
This indicator displays a message such as Probe Error, Low Temp,
or High Temp when an error is detected.
Compressor Run
This indicator displays a rotating icon to show when the
compressor is running.
Temperature Display
This indicator displays the set temperature.
11
Adjusting the Temperature
To adjust the temperature:
1. Press the SET button.
2. Press the Down button to decrease and the Up button to increase the
temperature by 1 degree increments.
3. When the desired temperature appears in the DISPLAY window of the control panel,
press the SET button to confirm. Best results are obtained at a room temperature
between 65° F and 90° F. Under normal conditions, when the unit has been on for six
hours, it will stop working for about thirty minutes to defrost automatically.
You can switch between Fahrenheit and Celsius by pressing the Up button for 10
seconds.
Interior Light
Press the light button to turn the interior light on or off. The light will automatically turn
off after 5 minutes.
Press and hold the light button for 6 seconds to enter “Lights On” mode. This mode will
prevent the lights from automatically turning off. Pressing the light button again will disable
“Lights On” mode.
Alarm Mode Indicator
In the event that there is an error detected, an alarm indicator will appear on the screen. In
the alarm mode, the unit will make a beeping sound and display an alarm message.
LOW TEMP: This message indicates that the actual temperature is much lower than the set
temperature.
HIGH TEMP: This message indicates that the actual temperature is much higher than your
set temperature. A possible cause may be a door that is not closed properly.
Compressor Run Indicator
The control panel will display a rotating icon representing a running fan when the
compressor is running. The icon will stop rotating when the compressor stops.
Control Panel LCD
A backlight will illuminate the Liquid Crystal Display (LCD) when you press any button on
the control panel. The backlight will automatically turn off after 2 minutes.
Note: Whether your outdoor beverage cooler can reach the actual set temperature depends
on the ambient environmental conditions.
Note: Avoid overusing the interior light as the heat generated by the light can raise the interior
temperature.
Caution: If you powered off the unit, please wait at least 5 minutes before powering it back on.
12
Warning: Never attempt to remove frost with a sharp object!
Normal Sounds
Your new outdoor beverage refrigerator may make sounds that are not familiar to you. Most of the
new sounds are normal. Hard surfaces like the floor and walls can make the sounds seem louder
than they actually are. The following describes the kinds of sounds that might be new to you and
what may be making them.
• Rattling noises may come from the flow of the refrigerant or the water line. Items stored on
top of the outdoor beverage refrigerator can also make noises.
• The high efficiency compressor may make a pulsating or high-pitched sound.
• Water running from the evaporator to the water bin may make a splashing sound.
• As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your
outdoor beverage refrigerator.
• You may hear air being forced over the condenser by the condenser fan.
Defrosting
The unit uses an automatic defrost system in which the refrigerated surfaces of the unit defrost
automatically. Defrost water drains into a hole in the floor of the storage compartment and is
channeled into a drain pan located at the back of the unit near the compressor. Heat
transferred from the compressor evaporates any water that has collected in the pan. Be sure
the drain hole in the floor of the unit is clear and unobstructed.
Preparing the Beverage Refrigerator for Storage
If the beverage refrigerator will not be used for a long time, or is to be moved to another place, it
will be necessary to defrost the unit and dry the interior.
1. Disconnect the cooler from the power supply by removing the power plug from the wall socket.
2. Leave the doors open to allow for air circulation and to prevent mold, mildew, and unpleasant
smells.
Caution: Store the unit out of the reach of children. If you have children, you may want to take
additional precautions such as removing the doors to prevent a child from being trapped
inside the cooler!
Important:
• Do not touch the power plug when your hands are wet.
• Never unplug the unit by pulling on the plug.
13
Cleaning and Maintenance
Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life.
Exterior Cleaning
Unplug your beverage refrigerator. Clean the outside with a cloth dampened in mild soapy water.
Dry thoroughly with a soft cloth. To clean the door gasket, use only mild soapy water. Never use
harsh cleansers or scouring pads to clean any part of your unit.
Interior Cleaning
Unplug your beverage refrigerator and remove its contents. Rinse the inside surfaces with
plain water and dry the chrome racks, basket, and shelving. Avoid getting excess water inside
the machine since it will flow into the water trap near the compressor and possibly overflow.
14
Troubleshooting
Before Calling for Help
If the unit appears to be malfunctioning, read through the “Operation” section of this manual first.
If the problem persists, check the Troubleshooting Guide below and on the following page. The
problem may be something that can easily be solved or explained.
Symptoms
Possible Causes
Solutions
The outdoor beverage cooler
turns on and off frequently.
The temperature is higher
than the recommended
ambient environment.
Run the cooler at the
appropriate ambient
temperature.
The door is being opened
often.
Minimize the number of times
the door is opened.
The door is not completely
closed.
Make sure the door is
completely closed.
The door gasket is not sealing
properly.
Make sure the door gasket is
sealing properly.
The cooler does not have the
suggested ventilation.
Read and follow the
“Installation Clearance
Requirements” section.
The outdoor beverage cooler
displays a Probe Error.
The thermostatic sensor has
malfunctioned.
Contact EdgeStar customer
service.
The outdoor beverage cooler
does not turn on.
There is a power failure.
Ensure the cooler is plugged
in and the power outlet has
power.
The cooler is not plugged in.
Plug the unit in to a power
outlet that has sufficient
amperage.
A house fuse has blown or
the circuit breaker is tripped.
Replace the broken fuse in
your fuse box or reset the
breaker. Make sure that the
circuit is not overloaded.
The outdoor beverage cooler
will not reach the desired
temperature.
The cooler is placed too close
to a heat source.
Keep the cooler away from
direct sun light or other heat
sources.
The cooler does not have
sufficient ventilation.
Read and follow the
“Installation Clearance
Requirements” section.
The door is opened too
frequently or for a long period
of time.
Close the door tightly and do
not open the door too
frequently or for a long period
of time.
The outdoor beverage cooler
is making strange noises.
Certain sounds are normal.
Read the “Normal Sounds”
section.
The unit is not level or is
touching another appliance.
Check to make sure that the
cooler is level, and that it is
not in contact with another
appliance or furniture.
15
Troubleshooting Continued
Symptoms
Possible Causes
Solutions
The body of the outdoor
beverage refrigerator is
electrified.
The unit is not grounded
properly.
Contact your local electrician
to test your electrical
grounding system.
Frost is forming in the outdoor
beverage cooler.
The environment is humid.
Though the unit uses an
“auto-defrost” system, under
certain conditions, manual
defrosting may be required. If
frost builds up, you can try
running the cooler on a
warmer temperature setting,
minimizing the number of
times you open the doors, or
unplugging the unit to allow
the frost to melt.
The ambient temperature is
too low.
The door is being opened too
frequently.
The door will not shut
properly.
Your cooler is not level.
Make sure the cooler is on a
level surface.
The door gasket is dirty.
Clean the door gasket.
The door gasket is not
installed correctly.
Make sure the door gasket is
properly installed.
The shelves are incorrectly
installed.
Correctly install the shelves.
16
Specifications
Description of product
Built-in Outdoor Beverage Refrigerator
Model
OBR901SS
Voltage / Frequency
AC 115V~60Hz
Amperage
2.0 A
Color
Stainless Cabinet; Glass Door with Stainless
Trim
Storage Capacity
84 Cans
Refrigerant
R134a, 2.3 oz.
High / Low Side Pressure
190 / 90 psig
Compartment Temperature Range
38° F – 65° F
Operating Temperature Range*
40° F -100° F
Dimensions
(Height x Width x Depth )
33 5/16” x 14 9/16” x 24 3/8”
Weight
76 pounds
Note: Technical data and performance information are provided for reference only.
*Note on Beverage Storage Capacity: The beverage cooler can store 105 standard 12 oz.
cans.
17
EdgeStar Limited Warranty
Limited Warranty: Full One-Year Parts and Labor
This product is warranted by EdgeStar and is subject to any conditions set forth as follows:
WHAT IS COVERED:
For a period of ONE (1) YEAR from the date of original retail purchase, EdgeStar will repair or replace any part free of charge
including labor that fails due to a defect in materials or workmanship. Labor will be performed free of charge at an authorized
EdgeStar repair facility and EdgeStar will supply new, rebuilt, or refurbished parts free of charge. EdgeStar may request a
defective part be returned in exchange for the replacement part. All replacement parts or products will be new,
remanufactured, or refurbished. All products and parts replaced by EdgeStar under warranty service become the property of
EdgeStar. After the 12 month period, EdgeStar will no longer be responsible for labor charges incurred or replacement parts. All
defective products and parts covered by this warranty will be repaired or replaced on a mail-in basis to an EdgeStar authorized
repair facility.
This warranty applies to the original purchaser only, and only covers defects in workmanship experienced during operation of the
product under normal service, maintenance, and usage conditions. This warranty applies to the purchase and use of this product
in residential settings within the contiguous United States of America.
Exceptions: Commercial or Rental Use Warranty
90 days labor and parts from date of original purchase. No other warranty applies.
WHAT IS NOT COVERED- The following limitations apply to the coverage of this warranty. This warranty does not cover:
-Labor charges for installation, setup, or training to use the product.
-Shipping damage, and any damage caused by improper packaging for shipment to an authorized service center, and any
damaged caused by improper voltage or any other misuse, including abnormal service, handling, or usage.
-Cosmetic damage such as scratches and dents.
-Normal wear and tear on parts or replacement of parts designed to be replaced, e.g. filters, cartridges, batteries.
-Service trips to deliver, pick-up, or repair, install the product, or to instruct in proper usage of the product.
-Damages or operating problems resulting from misuse, abuse, operation outside environmental specifications, uses contrary to
instructions provided in the owner’s manual, accidents, acts of God, vermin, fire, flood, improper installation, unauthorized service,
maintenance negligence, unauthorized installation or modification, or commercial use.
-Labor, service transportation, and shipping charges for the removal and replacement of defective parts, beyond the initial 12
month period.
-Products that have been modified to perform outside of specifications without the prior written permission of EdgeStar.
-Products lost in shipment, or theft.
-Products sold AS IS or from an unauthorized reseller.
-Products that have had their serial numbers removed, defaced, or with serial numbers that have been invalidated.
-Damage from other than normal household use.
-Replacement or repair of household fuses, circuit breakers, wiring or plumbing.
-Damage to personal property from use of product.
-Damage from service other than from an authorized EdgeStar repair facility.
-Hoses, knobs, lint trays and all attachments, accessories and disposable parts.
-Any service charges not specifically identified as normal such as normal service area or hours.
-Any special or consequential damages arising out of the use of the product.
OBTAINING WARRANTY SERVICE: If you believe your product is defective, contact EdgeStar Customer Support for
troubleshooting assistance and warranty service at www.edgestar.com or call 1-866-319-5473. Before contacting Customer
Support you are required to have your model number, serial number, and proof of purchase available upon request. Once an
EdgeStar authorized representative has confirmed that your product is defective and eligible for warranty service, the product
must be returned to an EdgeStar authorized repair facility. EdgeStar is not responsible for damage resulting from shipper
mishandling or improper packaging. Do not return a defective product to the place of
purchase. Products received without a
return authorization number will be refused.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD
ABOVE. NEITHER THE MANUFACTURER NOR ITS DISTRIBUTORS SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES
OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE.
IN NO EVENT AND UNDER NO CIRCUMSTANCE OF ANY TYPE OR KIND SHALL THE SELLER, MANUFACTURER AND/OR DISTRIBUTOR BE
LIABLE FOR ANY REASON, UNDER ANY THEORY, FOR MORE THAN THE BASIC COST OF THE PRODUCT TO THE PURCHASER OR END
USER. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
