Loading ...
Loading ...
Loading ...
17
Water inlet valve and inlet valve
r
To prevent blockage to the water supply by ingress of foreign
substances, clean the water inlet valve and inlet valve regularly.
Moving the machine
Remove the back cover.
Remove the blanking plugs.
Tighten the bolts with a spanner.
Replace the ba
If the appliance is le idle for a longer period, pull out the electrical plug and turn off water supply.
Open the door to prevent formaon of moisture and odors.
Let door open while not used.
Before next usage check carefully power cord, water inlet and drain hose. Make sure everything is
properly installed and without leackage.
ck cover.
Long periods of disuse
Display Codes
Maintenance
Codes Causes
E2
Door is not properly shut.
Shut the door properly, and then press
the
F3 Temperature sensor not properly
connected or damaged.
Contact the maintenance personnel.
F4 Heater error (Appears at the end of a
cycle).
Contact the maintenance personnel.
E4 Water level not met in 7 minutes.
The height of the drain hose is below 80
cm.
The drain hose is in water.
Make sure that tap is turned on, and water
pressure is normal.
maintenance personnel.
Install drain hose within 80-100 cm of
height.
Make sure the drain hose is not in water.
6 minutes.
Clean the pump filter and check the drain
hose
contact the maintenance personnel.
Insert the plasc stabilizers and the transportaon bolts.
Loading ...
Loading ...
Loading ...