Loading ...
Loading ...
Loading ...
54
Before First Use
Before using your ReversaGrill for the first
time, remove all packaging and promotional
materials from the cooking plate, drip tray,
base, control probe and cleaning spatula.
With the control probe detached, wash
the cooking plate, drip tray and base with
warm soapy water using a mild household
detergent.
Rinse and dry thoroughly. Make sure the
interior of the probe inlet is fully dry.
Note: Do not immerse the heat control probe
in water or any other liquid.
Condition the cooking plates to protect the
non-stick surface by applying a light coating
of vegetable oil or use a non-stick cooking
spray. Wipe off excess oil.
For easy cleaning line the drip tray with
aluminium foil to collect the fats and juices.
Place drip tray into base.
Ensure the drip tray and grill plate are
correctly positioned over the base to
deactivate the safety locking mechanism.
Note: When using the ReversaGrill for the
first time you may notice a fine smoke haze
being emitted from the unit. This is normal.
It is due to the initial heating of internal
components.
Using your ReversaGrill
1. Place on a flat, level, heat-resistant
surface.
2. Insert the control probe fully into the
probe inlet of the grill plate.
3. Plug the cord into a 230-240 volt AC
power outlet and turn the power ON.
4. Set the control probe dial to the desired
heat setting or the recommended
temperature setting for your required
recipe.
5. Preheat until the thermostat light switches
off, indicating the ReversaGrill is ready to
use.
Note: The thermostat light on the control
probe indicates the ReversaGrill is heating.
This light will remain on until the set
temperature has been reached and then will
cycle on and off during cooking to ensure
the selected temperature is maintained. The
preheat time will depend on the heat setting
selected.
Note: When grilling on high heat settings, the
ReversaGrill will generate smoke. Selecting
a lower heat setting will reduce smoke.
For indoor use, adequate ventilation or an
exhaust fan is recommended.
6. After you have completed grilling turn the
power OFF and unplug from the power
outlet.
Note: Ensure the cord is kept well away from
the cooking plates when in use.
Caution: Do not touch the grill plate when in
use. Avoid touching hot surfaces. Take care
when removing food from the grill. Do not
transport the grill when it is hot.
Usage Instructions
Use heat-resistant plastic or wooden utensils
when cooking on the grill. Always use these
utensils only to remove food from the grill.
Do not use sharp or metal objects as these
will scratch the non-stick surface.
Do not cut food on top of the cooking plates.
Do not leave plastic utensils in contact with
the cooking plate while in use.
To clean after use
Always turn the power off and remove the
plug from the power outlet and the control
probe from the probe inlet before cleaning.
Allow the ReversaGrill to cool before
cleaning.
DiamondForce™ non-stick grill plate
The element in the grill plate is cast in, so it
is safe to fully immerse in water.
Wash the grill plate in warm soapy water
using a mild household detergent and a soft
washing sponge.
When cleaning DiamondForce™ non-stick
coating, do not use abrasives or metal
scourers as they will scratch the non-stick
surface.
A bottle brush may be used to clean the drip
holes in the grill plate.
Be sure to clean the handles after each use.
The grill plate is also dishwasher safe. When
the plate has cooled down, you may wipe
using a paper towel to remove residue on
the grill. With the control probe detached,
wash with warm soapy water using a mild
household detergent. Rinse thoroughly and
dry the plate with a soft cloth, also make
sure the interior of the probe inlet is fully dry
before storage.
To remove stubborn food residues, use the
plastic cleaning spatula provided, only when
the grill plate has completely cooled.
Moulded base
The base can be wiped over with a damp
cloth or washed in warm soapy water using a
mild household detergent and a soft washing
sponge.
Do not use abrasives or metal scourers as
they may scratch the exterior surface.
The moulded base is also dishwasher safe.
Dry the base thoroughly before storing.
Drip tray
Lift the metal drip tray out from the base
and pour any excess grease or liquid into a
container and dispose of appropriately. Do
not pour oil or fats down the sink.
Wash the metal drip tray in warm soapy water
using a mild household detergent and a soft
washing sponge.
Dry the drip tray thoroughly before storing.
Do not place the metal drip tray in the
dishwasher.
Control probe
If cleaning is necessary, wipe over with a
damp cloth.
Important: Do not immerse the control probe
in water or any other liquid. Do not place the
control probe in the dishwasher.
Do not knock or drop the probe as this can
damage the probe. If damage is suspected,
return the control probe to your nearest
Sunbeam Service Centre for inspection.
Note: Before inserting the control probe
into the probe inlet, ensure the interior of
the inlet is completely dry. To do this wipe
interior of probe inlet with a dry cloth or
shake out excess water vigorously.
Storage
Allow the grill to cool completely and clean
it after each use and dry thoroughly before
storing it away.
Care & Cleaning
Loading ...
Loading ...
Loading ...