Loading ...
Loading ...
Loading ...
11
BREW
POWER
DRAIN BREWER
HEATING
DESCALE
PUSH TO BREW
AUTO OFF
ADD WATER
Empty the Water Reservoir then fill with bottled or filtered water and
return to the brewer. If needed, repeat above procedures. CAUTION:
Please rinse the Water Reservoir thoroughly after cleaning. This will
ensure that no cleaners or cleaning solutions remain in this area as they
may contaminate the water supply in the brewer.
Descaling Your Brewer
Depending on the mineral content of your water, calcium deposits or
scale may build up in your brewer. Scale is non-toxic but if left
unattended can hinder brewer performance. Regularly descaling your
brewer every 3-6 months helps maintain the heating element, and other
internal parts that come in contact with water. Calcium deposits may
build up faster, making it necessary to descale
more often.
Before you begin, you will need a large ceramic
mug, fresh water, descale solution and access
to a sink. Do not use a paper cup.
Properly follow the descaling procedure.
fig.
11
Descaling Procedure
Empty the water from the Water Reservoir. If there is a Keurig™ Water
Filter, remove and set aside. Disable “Auto Off” features, if necessary
(refer to page 9).
STEP 1: FIRST DESCALING SOLUTION RINSE
• Press the Power Button to power the brewer off.
• Pour the entire bottle of Keurig™ Descaling Solution into the Water
Reservoir. Then fill the empty bottle with water and pour into the
Water Reservoir. Press the Power Button to turn the brewer back on.
• Place a large mug on the Drip Tray Plate and run a cleansing brew
using the largest brew size. Do not use a K-Cup® pod. Pour the
contents of the mug into the sink.
STEP 2: SECOND DESCALING SOLUTION RINSE
• Repeat the brew process without a K-Cup® pod, until ADD WATER is
indicated. Let brewer stand for at least 30 minutes while still on.
• After 30 minutes, discard any residual solution and rinse the Water
Reservoir thoroughly.
STEP 3: FRESH WATER RINSE
• Ensure the Water Reservoir is filled with fresh water to and not
beyond the MAX FILL line.
• Place a large mug on the Drip Tray Plate and run a cleansing brew
using the largest brew size. Do not use a K-Cup® pod. Pour the
contents of the mug into the sink.
• Repeat brew process until you have completed at least 12 brews
using the largest brew size. You may need to refill the Water
Reservoir at least one time during this process.
NOTE: If “DESCALE” is still indicated after completing the procedure,
repeat the descaling procedure above.
Loading ...
Loading ...
Loading ...