Loading ...
Loading ...
Loading ...
DJI RS 2 User Manual
© 2020 DJI OSMO All Rights Reserved.
17
Follow Mode: tap to select follow mode. The tilt motor controls the tilt axis to follow,
pan motor controls the pan axis to follow, and roll motor controls the roll axis to follow.
PF: pan follow, where only the pan axis follows the movement of the grip.
PTF: pan and tilt follow, where both the pan and tilt axes follow the movement of the grip.
FPV: pan, tilt and roll follow, where all three axes follow the movement of the grip.
3D Roll 360: enable to shoot footage while rotating the camera 360°.
Portrait: enable to shoot in portrait mode.
Custom: enable or disable any axis follow as required.
Follow Speed: tap to select follow speed. Users can choose fast, medium, slow, and
custom.
Joystick Speed: allows users to control the speed of the joystick for the gimbal. Users
can choose fast, medium, slow, and custom.
Joystick Smoothness: allows users to control the sensitivity of the gimbal. The lower
the smoothing value, the more sensitive the movement of the gimbal.
Dial Functions: allows users to set the function of the front dial. Users can choose to
control the focus motor, focus, ISO, aperture, and roll axis.
Dial Speed: allows users to set the response speed of the function set for the front dial.
30
High
Joystick Speed Joystick Smoothness
Dial Functions Dial Speed
Slide Up: Joystick and Front Dial Settings Screen
Slide up from the bottom of the screen to enter the joystick
and front dial settings screen.
100
Slide Down: Image Transmission Screen
Slide down from the top of the screen to enter the image
transmission screen after mounting the DJI Ronin RavenEye
Image Transmission System.
After the subject is selected, ActiveTrack can be enabled by pressing the trigger once.
ActiveTrack allows users to track the subject automatically and maintain the subject in the
middle of the frame.
The appropriate speed should be set by adjusting the speed bar on the bottom of the
screen when using ActiveTrack. Subjects may be lost if the speed is set too high and
the stabilization may be aected if the speed is set too low.
Loading ...
Loading ...
Loading ...