Loading ...
!
2!
SAFETY INFORMATION
1. This heater is hot when in use. To avoid burns, do not let skin touch hot surfaces. If provided,
use handles when moving the heater. Keep all combustible materials such as furniture,
pillows, bedding, papers, curtains, and all other textiles at least 3-feet from the front of the
heater.
2. Use extreme caution when using the heater near children, elderly, and pets. Never leave the
heater unattended when in use.
3. Always unplug the heater when not in use.
4. Do not operate the heater if it has a damaged cord or plug, malfunctions, or has been
dropped or damaged. Return heater to authorized facility for examination for electrical or
mechanical adjustments or repairs.
5. Do not use heater outdoors.
6. This heater is not intended for use in bathrooms, laundry areas, or any location where it can
be exposed to water. Always use in a dry location.
7. Do not run the power cord under any carpeting. Do not cover power cord with throw rugs,
runners, or any kind of floor covering textile. Keep the power cord away from any traffic
areas where it could be tripped over.
8. To disconnect the heater, turn all controls to the OFF position, then remove plug from the
outlet.
9. Connect ONLY to properly grounded outlets.
10. Do not insert or allow any foreign objects to enter the ventilation or exhaust opening as this
may cause an electrical shock or fire, as well as damaging the heater.
11. Too prevent a possible fire, do not block air intakes or exhaust at any time. Never use the
heater on a soft surface, such as a bed, where openings may become obstructed.
12. This heater has hot and potentially sparking parts inside. Do not use in areas where
gasoline, paint, or any flammable liquids are used or stored.
13. Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electrical shock, and injury.
14. Always plug heaters directly into a wall outlet. Never use with an extension cord or
relocatable power tab (outlet/power strip)
15. This electrical fireplace is not designed for “zero” clearance wall and/or cabinet/millwork
installations. Accessibility for servicing and maintenance must be possible without disturbing
building structures and/or cabinet millwork finishes.
USER INSTRUCTIONS
1. Any repairs to this unit must be carried out by a qualified and approved service person only.
2. Under no circumstance should this unit be modified. Parts having to be removed for servicing
must be replaced with original parts supplied by the manufacture only.
3. This heater can be cleaned with a damp cloth using water only. Always unplug heater before
cleaning. Do not use abrasive cleaners on this heater.
Loading ...
Loading ...
Loading ...