Loading ...
Loading ...
Loading ...
12
3. Aach ceiling mounting plate
Align the mounting plate with the pre-drilled holes. Ensure that the cable pass through holes on the
mount are positioned appropriately.
Wood Joist/Truss Mounting:
Align the bracket with the screw keyed slots
and turn to hold in place. Finish tightening all
lag screws with washers until they are snug with
the mounting surface. Do not over tighten the
lag screws. Tighten the lag screws only until the
washers are pulled rmly against the bracket.
Concrete:
Align the bracket with the pre-drilled holes.
Attach bracket to the ceiling using the six lag
screws and six at washers. Tighten all lag screws
using a socket wrench and ½” socket. Make sure
the anchor is seated completely ush with the
concrete surface even if there is another layer of
material, such as drywall. Do not over tighten the
lag screws. Tighten the lag screws only until the
washers are pulled rmly against the bracket.
Loading ...
Loading ...
Loading ...