Loading ...
Loading ...
Loading ...
29
EN
PROGRAMMING THE MACCHINE
COFFEE DOSE PROGRAMMING
Place a cup or coffee cup under the dispenser.
Lift the loading lever until it locks, then fit a pod into
the compartment.
Press and hold one of the two coffee delivery buttons.
The selected button will flash and the coffee ma-
chine will enter the programming mode.
Once the desired amount of coffee has been ob-
tained, stop supply by releasing the button.
Lower the capsule loading lever to close the capsule
fitting compartment.
The machine is set to the energy-saving mode is the
supply is not started immediately when a button is
kept pressed down. If the button is pressed down until
the operating temperature is reached, the supply will
start and, therefore, the desired dose can be pro-
grammed by releasing the button when the amount is
reached.
The programmed amount for the supplied product
can be changed as follows:
MIN.: 0.5 fl oz (15 ml). If the programmed dose is low-
er than this limit, the supply will, when the button is
released, continue until the previously set dose is
reached or, if no dose has been set, until the expected
standard dose is reached.
MAX.: the amount of product the machine is able to
supply within 90 seconds.
After this limit is reached, the machine will stop auto-
matically.
If the electric power supply fails during a dose pro-
gramming operation, the programming procedure will
have to be repeated.
If, during a dose programming operation, the machine
informs that water is not found in the tank, the dose
programming procedure will have to be repeated after
water is added.
Loading ...
Loading ...
Loading ...