Loading ...
Loading ...
Loading ...
29
Accessories
PXAA
New Construction Accessories
PDXWSA
PDXWSEXT18
PDXWSEXT24
PDXWSEXT
WALL SLEEVE Galvanized zinc coated steel is prepared in an 11-
step process, then powder coated with a polyester nish and cured
in an oven for exceptional durability. The wall sleeve is insulated for
sound absorption and thermal efciency, 16" H x 42" W x 13
3
/4" D.
DEEP WALL SLEEVE For walls up to 17
1
/2" D.
DEEP WALL SLEEVE For walls up to 23
1
/2" D.
CUSTOM DEEP WALL SLEEVE One piece extended wall sleeve for walls
from 13
1
/4" to 25
1
/2" D are available by special order.
PXSE
SLEEVE EXTENSION RETROFIT KIT Galvanized zinc coated steel, 2
3
/8"
sleeve extension attached to the room side of the sleeve to allow for the
installation of a PZ-Series Friedrich PTAC in a T-Series sleeve.
PXGA GRILLE Standard, stamped aluminium, anodized to resist chalking and
oxidation.
PXAA
PXBG
PXSC
ARCHITECTURAL GRILLES Consist of heavy-gauge 6063-T5
aluminum alloy: 42" W x 16" H x 1
1
/8" D
PXAA – Clear, extruded aluminum
PXBG – Beige acrylic enamel
PXSC – Also available in custom colors.
PXDR10 CONDENSATE DRAIN KIT Attaches to the bottom of the wall sleeve for
internal draining of condensate or to the rear wall sleeve ange for ex-
ternal draining. Recommended on all units to remove excess conden-
sate. Packaged in quantities of ten.
PXCJA CONDUIT KIT WITH JUNCTION BOX Hard wire conduit kit with junc-
tion box for 208/230V and 265V units (subbase not required).
Kit includes a means of quick disconnect for easy removal of the
chassis. *Required for 265V installations.
PXFTB
REPLACEMENT FILTER PACK These are original equipment return air
lters. They are reusable and can be cleaned by vacuuming, washing,
or blowing out, and are sold in convenient ten-packs. (Two lters per
chassis).
PXGA
Deep wall sleeve PDXWSEXT18 shown with weather panel
PDXWSA
Loading ...
Loading ...