Loading ...
Loading ...
Loading ...
25
Maintenance
Service Schedule
MAINTENANCE DAILY WEEKLY QUARTERLY
Check machine for cord damage *
Check recovery dome and gasket for damage and cleanliness *
Check brushes - should be clean with no lint or strings attached *
Clean debris tray behind brush *
Clean the underside of the brush deck area *
Observe spray pattern *
Inspect vac shoe for blockage; Remove and rinse any debris *
Check hoses for wear, blockages, or damage *
Check handles, switches, and knobs for damage *
Run one gallon of water through solution system at end of day *
Clean out recovery tank, clean float screen and check float ball to
make sure it moves freely
*
Clean out solution tank *
Clean outside of all tanks and check for damage *
Run vac motor for at least one minute to allow motor to dry *
Store with recovery dome and solution lid removed to allow the tank
to dry
*
Remove bearing cap from end of brush. Clean bearing and cap. *
Check all bearings for noise *
Check all gaskets for wear and leakage *
Check and clean solution screen *
Check brush for wear; ensure bristles are not damaged *
Check condition of vac shoe and frame for damage *
Remove the bearing end cap off of the brush and clean *
Check overall performance of machine *
Clean debris from height adjust wheels *
Check belts for wear and replace as necessary *
Check cables for fraying *
Check pump pressure; observe spray pattern and check with gauge
if necessary
*
86409500 Operator’s Manual - Armada BRC 40/22
Loading ...
Loading ...
Loading ...