Loading ...
Loading ...
Loading ...
10
and insert the middle of the line into the groove in the
center of the spool.
b. Wind the line tightly around the spool according to the
direction of the arrow on the spool. Tightly wind it until
there is about 6 in. (15.24 cm) of the line left.
c. Lock each end of the line into opposite gaps on the
spool ange.
3. Wind both ends into the grooves using slight tension and
following the direction of the arrows (Fig. 18).
4. Re-install the spool as instructed in steps 2a to 2e of
"Replacing the Spool + Clearing Jams and Tangled Lines".
mCAUTION! Catapulted pieces of nylon line may cause
injury.
NOTE: The maximum recommended length of line in the spool
is 12 ft (3.7 m), with 6.6 ft (2 m) per slot.
mWARNING! Pay attention to the winding direction.
NOTE: Always replace the spool with a new pre-wound spool.
Visit snowjoe.com to purchase the pre-wound spool
(model TRJ607E-RS-6PK) for this electric grass trimmer.
IMPORTANT: Keep all areas of the cutting head and cutting
head cover clean. Place the cap back by pushing it rmly
onto the cutting head. To ensure that the cutting head cover
is correctly tted, try to remove it without depressing the two
latches. If it is correctly tted, it should not move.
Storage
Follow these recommendations for storing the trimmer.
• Clean the trimmer thoroughly before storing.
• Store the trimmer in a stable and safe position out of the
reach of children. Keep the trimmer in a dry place where the
temperature is not too hot or too cold.
• When storing the trimmer, do not rest it against the oor.
Hang it by the upper handgrip so that the guard does not
touch anything. If the guard rests against a surface, its
shape and dimensions could be permanently altered, and
could render the machine unsafe to use.
Service + Support
If your Sun Joe
®
TRJ607E-RM electric grass trimmer requires
service or maintenance, please call the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE (1-866-766-9563).
Model + Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
Fig. 17
Groove
Gaps on ange
Fig. 18
Record the following numbers from the housing or handle of your
new product:
Model #:
Serial #:
T R J 6 0 7 E - R M
Loading ...
Loading ...
Loading ...