Loading ...
Loading ...
Loading ...
13
4. Preparation
4.1 Things to be done
for energy saving
A
Connecting the product
to electric energy saving
devices is risky as it may
cause damage on the
product.
• Do not leave the doors of your
appliance open for a long
time.
• Do not put hot food or drinks
in your refrigerator.
• Do not overload the
appliance. Cooling capacity
will fall when the air
circulation inside is hindered.
• Do not place the appliance
in places subject to direct
sunlight. Install the product
at least 30 cm away from heat
sources such as hobs, ovens,
heater cores and stoves
and at least 5 cm away from
electrical ovens.
• Pay attention to store your
food in Freezer in closed
containers.
• You can load maximum
amount of food to the freezer
compartment of the Freezer
by removing the freezer
compartment drawers.
Declared energy consumption
value of the refrigerator was
determined with the freezer
compartment drawers. There
is no risk in removing a shelf
or drawer to make suitable
for the shapes and sizes of
the foods to be frozen.
• Thawing frozen food in fridge
compartment will both
provide energy saving and
preserve the food quality.
• Since hot and humid air
will not directly penetrate
into your product when the
doors are not opened, your
product will optimize itself
in conditions sufficient to
protect your food. Functions
and components such as
compressor, fan, heater,
defrost, lighting, display and
so on will operate according
to the needs to consume
minimum energy under these
circumstances.
4.2 Initial use
Before starting to use the
product, check that all
preparations are made in
accordance with the instructions
in sections "Important
instructions for safety and
environment" and "Installation".
• Clean the interior of the
appliance as recommended
in the “Maintenance and
Loading ...
Loading ...
Loading ...