Loading ...
Loading ...
Loading ...
Operation
24 • English EX-440C/1280/1280C/12AEC • Installation & Operation Guide
PRO.BOSE.COM
CONFIG > Dante Info Page
The Dante Info page displays settings that correspond
to what is displayed in the Dante controller software.
You cannot edit these settings.
The settings are:
IP: The IP address of the processor's Dante card.
MAC ADDRESS: The MAC address of the
processor's VoIP card.
Ch Num: The number of available Dante channels
(inputs × outputs).
MODE: The current Dante device network
configuration. You can use ControlSpace Designer
to set this to SWITCHED, LEGACY, REDUNDANT,
or ISOLATED. See the help system for
ControlSpace Designer to learn about these modes.
ID: The name of the product.
Device: The assigned name of the Dante device.
You can use ControlSpace Designer or the Dante
controller to set this name.
Fact Model: The version number of the processor's
boot ROM.
Fact SW: The version number of the processor's
Bose software.
Fact FW: The version number of the processor's
Bose firmware.
SW: The version number of the processor's
Audinate Dante software.
FW: The version number of the processor's
Audinate Dante firmware.
CONFIG > Firmware Versions Page
The Firmware Versions page displays the version
numbers of the software and/or firmware for these
components of the processor:
FW: The processor's firmware.
DSP: The processor's software that manages its
digital signal processing.
AEC: The processor's software that manages its
acoustic echo cancellation (EX-440C, EX-1280C,
and EX-12AEC only).
PSTN: The processor's software that manages its
PSTN functions (EX-440C and EX-1280C only).
Dante: The processor's software that manages its
Dante network functions.
Kernel: The processor's operating system kernel.
VoIP: The processor's software that manages its
VoIP functions (EX-440C and EX-1280C only).
Num Ch: The number of available Dante channels
(inputs × outputs).
Loading ...
Loading ...
Loading ...