Loading ...
Loading ...
Loading ...
11
3. Follow the same instructions above to t and secure the
upper handle frame onto the middle handle frame with the
other latch + threaded connector set (Fig. 7).
4. Use the clips to secure the cable during operation. Insert
the cable into the cable clips, and attach to the handle
frame as shown (Fig. 8).
Discharge Chute Assembly
1. Slide the discharge chute assembly into position, as
shown. Align the bottom of the discharge chute assembly
with the 3 tabs on the machine (Fig. 9).
2. Use the included hex key wrench to properly secure the
discharge chute with the discharge chute screw provided
(Fig. 10).
3. Raise or lower the chute deector to the desired height of
the snow stream by hold the discharge chute handle and
press the chute deector trigger (Fig. 11).
Discharge
chute trigger
Fig. 11
Fig. 7
Upper handle
frame
Handle frame latch +
threaded connector
Middle
handle
frame
Fig. 8
Cable clip
Fig. 9
Discharge chute assembly
Bottom
piece
Tabs
Fig. 10
Discharge
chute screw
Hex key
wrench
Loading ...
Loading ...
Loading ...