Loading ...
Loading ...
Loading ...
19
EN
Drill 2 holes of top of the back kitchen cabinet. The distance between two holes should
be 430mm.
Fixing clip can be adjust from 6mm to 25mm..
Kitchen cabinet cut out size is 520mm*180mm.
Fix the bracket on hood body rst, and then insert the body into the cut out cabinet.
Raise the hood until xing clip also come through the kitchen cabinet, so that the clip can
seat on top of the cabinet, avoid unit falling.
By rotate the screw on picture 4, same direction as clockwise, you can x this clip. When
you want to loss the clip, you can rotate the screw at opposite direction of clock.
With ST6*40mm screw to x the upper bracket on back kitchen cabinet.
With ST4*20mm screw to x the hoods on the kitchen cabinet..
Loading ...
Loading ...
Loading ...