Loading ...
V1 ENGLISH 20-0895
Adjusting the lights
Note: If you turn o or unplug your tape light, it will remember
your last brightness and color settings.
• Press (POWER) to turn the tape light on and o.
• Press (COLOR) repeatedly to change the color
combination. There are 20 selectable colors, including
white.
• Press (BRIGHT) repeatedly to adjust the brightness.
There are eight brightness levels.
Specications
• USB power supply (included): 5V DC, 2A
• Power input: 5V DC, 0.5A minimum (2A recommended)
• Tape light length: 8 ft. (2.4 m)
Troubleshooting
LEDs will not turn on.
• Press the power button to make sure that your lights are
turned on, then press (BRIGHT) to increase the
brightness.
• Make sure that your lights are connected to a working
USB port or power outlet. If connected to a computer,
turn on your computer.
• Make sure that your lights are plugged into the USB
power supply, then make sure that the USB power supply
is plugged into a working power outlet.
• If your lights are plugged into a USB port on a TV,
computer, or other device and they are not working, use
the included USB power supply.
• If you are trying to reach full brightness, especially with
white light, use a 2A power supply. Your tape light will still
function with lower-output power supplies, just at reduced
brightness. Using the included USB power supply will
ensure the best performance.
LEDs icker or turn on and o.
• Make sure that your lights are plugged into a working power
outlet or USB port. Try plugging into a dierent power source.
• Use the included USB power supply for best performance.
• Make sure that the cable is not damaged.
Safety information
• To avoid damage to the light strip, do not sharply twist or
bend the light strip 90°or more.
• Do not cut the silver solder markings. Only cut in the center
of the copper-colored pads.
• Do not plug in your lights when they are coiled. This can
generate excess heat which can damage the product or
connected device.
Legal notices
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
ICES statement:
CAN ICES-3 B/NMB-3 B
One-year limited warranty
Visit www.bestbuy.com/bestbuyessentials for details.
Contact Best Buy Essentials
For customer service, call 866-597-8427 (U.S. and Canada)
www.bestbuy.com/bestbuyessentials
Best Buy Essentials is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2021 Best Buy. All rights reserved.
BE-LED8RGB19_20-0895_QSG_V1_EN_Final.eps 2 2/9/2021 9:39:28 AM