Loading ...
Loading ...
Loading ...
nuwavenow.com
15
ENGLISH
nuwavenow.com
15
instructions
14
INSTRUCTIONS
14
BEFORE USE:
Wipe surface with a cloth soaked in warm, soapy water. Dry throughly.
IMPORTANT - Do not immerse PIC Flex in
water or attempt to cycle through dishwasher.
The outer surface may be cleaned by wiping
carefully with a damp dishcloth or sponge.
Make sure PIC Flex has cooled completely
prior to cleaning.
General Cleaning Instructions:
1. Unplug the PIC Flex before cleaning.
2. Clean after each use.
3. Make sure the PIC Flex has cooled completely prior to cleaning.
4. The outer surface may be cleaned by wiping carefully with a
damp dishcloth or sponge.
5. Remove the power plug prior to cleaning the NuWave PIC
Flex. Do not use caustic cleaning agents and water should not
penetrate the interior of the induction cooktop.
6. Never immerse the PIC Flex’s cables or plug in water or
other liquids.
7. Wipe the glass surface with a damp cloth or use a mild, non-
abrasive soap solution. Make sure the PIC Flex has cooled
completely before cleaning.
8. Wipe the casing and operating panel with a damp soft cloth and
mild detergent.
9. Do not use oil-based cleansing products as their use may
damage plastic parts or the casing/operating panel.
10. Do not use flammable, acidic or alkaline materials or substances
near the PIC Flex, as this may reduce the service life of the
induction cooktop or pose a fire risk when the induction cooktop
is in use.
11. Ensure that the bottom of any cookware does not scrape the PIC
Flex’s glass surface, although a scratched surface will not impair
the use of the induction cooktop.
12. Properly clean the PIC before storing it in a cool, dry place.
IMPORTANT TIPS:
1. Check power outlets to ensure proper operation. Do not use in an
outlet where other major appliances are engaged. Check settings
if the PIC Flex is cooking too slowly.
2. The electrical plug must be properly plugged into the outlet.
Panel Display Chart
Press Button Temperature Panel Display Examples
Low 100F/38C 100F/38C Warm
Med/Low 175F/79C 175F/79C Simmer
Med 275F/135C 275F/135C Steam
Med/High 375°F/191C 375F/191C Stir/Deep-Fry
High 425F/218C 425F/218C Boil/Saute
Max/Sear 500F/260C SEAR Sear
The minimum is 100F (38C) while the maximum temperature
reaches 500F (260C).
Note: Do not remove pots and pans during cooking process.
If necessary, press Pause/Clear to pause before removing.
• To continue to the
next stage enter the
cooking temperature.
Continue with step 2 from
Programming Function.
5. To begin the countdown
press Start. When delay
countdown reaches “0” the
PIC Flex will beep twice.
The cooking time will start
and the temperature will be
displayed.
CLEANING & MAINTENANCE
Loading ...
Loading ...
Loading ...