Bose AHX User Manual

Loading ...

ETTING YOUR HEADSET READY FOR USE

Inserting batteries

Insert the two supplied alkaline AA batteries (IEC LR6) into the

control module (Figure 10).

Figure 10

Installing the two batteries

CAUTION: The battery compartment is designed to prevent inadvertent

reverse polarity from installing the batteries incorrectly. If the batteries do

not

seem to fit correctly, do not force them in. Forcing an improper connec-

tion will cause permanent damage to the control module.

Preparing the aircraft powered headset for use

For permanent installation of the headset, the harness (material

number 323172-0010) is installed into the aircraft. The 3-foot

wiring harness includes a self-latching, pr

ecision designed, quick-

connector for panel mounting in the aircraft. The connector is

mechanically keyed to ensure proper mating. To order additional

harnesses, call Bose at 1-800-242-9008.

Note: The aircraft panel connector must be mounted and docu-

mented by qualified personnel to pe

rform this type of avionics

installation into the aircraft being used. Co

nsult your local FAA office

or aviation authorities to determine the appropriate documentation

required.

The Bose connector (material number 323172-0010) is TSO

appr

oved (C-57a and C-58a) together with the Bose Series II

Aviation Headset and the Bose Aviation Headset X.

Attaching and removing the cable

When the quick-connector is installed, the cable leading from the

control module connects to it. Match the narrow bar on the cable

end to the slot on the connector. Press in until the two parts engage

(Figure 11 on page 15).

To release the cable, pull back on the sleeve near the end of the

ble. Then gently remove the cable from the connector.

00_AM270261-01_HeadsetXII.book Page 14 Tuesday, August 11, 2009 2:27 PM

Loading ...

Bose AHX Aviation Headset X