Loading ...
Loading ...
Loading ...
ProTeam 11
Emptying the Tank
Blowing Feature
Your Wet/Dry Vacuum has the capability
to be used as a blower for yard work,
patio cleanup and workshop applications
to blow sawdust and other debris.
NOTE: The blowing port is located
opposite the Vacuum port.
WARNING - Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before using
as a blower.
WARNING - To reduce the risk of
injury to bystanders, keep them clear
of blowing debris.
CAUTION - Wear a dust mask, such as an N95 or P100 mask, if blowing creates
dust which might be inhaled.
CAUTION - To reduce the risk of hearing damage, wear ear protectors when using
the Vacuum/Blower for extended time or in a noisy area.
OPERATION (Continued)
Power
Head
Tank
Latch
Tank
Figure F
Figure G
1. To remove the lid to empty contents
of the tank, simply lift the two tank
latches on the side of the Vacuum
and lift the power head up and off
the tank and set to the side
(Figure F).
2. Lay the power head on a clean dry
area while emptying the tank or
changing the filter.
3. Dump the tank contents into the
proper waste disposal container
(Figure G).
!
!
!
!
SP6768-3 PROTEAM 4 GALLON 10/22/12 7:01 PM Page 11
Loading ...
Loading ...
Loading ...