Loading ...
Loading ...
Loading ...
10 ProTeam
OPERATION (Continued)
Vacuuming Dry Materials
1. The filter must be in correct position at all times to avoid leaks and possible
damage to Vacuum.
2. When using your Vacuum to pick up very fine dust, it will be necessary for you to
empty the tank and clean the filter at more frequent intervals to maintain peak
Vacuum performance.
NOTE: A dry filter is necessary to pick up dry material. If you use your Vacuum to
pick up dust when the filter is wet, the filter will clog quickly and will be very
difficult to clean.
WARNING: Do not operate without filter cage and float, as they prevent liquid
from entering the impeller and damaging the motor. For dry material pick-up, do
not operate without the filter in place to reduce the risk of damage to the motor.
Vacuuming Liquids
1. When picking up small amounts of liquid, the filter may be left in place.
2. When picking up large amounts of liquid, we recommend that the filter be
removed. If the filter is not removed, it will become saturated and misting may
appear in the exhaust.
3. When the liquid in the tank reaches a predetermined level, the float mechanism
will rise automatically to cut off airflow. You will know that the float has risen
because Vacuum airflow ceases and the motor noise will become higher in pitch,
due to increased motor speed. When this happens, turn off the Vacuum and
empty the tank.
4. After using the Vacuum to pick up liquids, the filter must be dried to avoid
possible mildew and damage to the filter.
IMPORTANT: To avoid damage to the Vacuum, do not run motor with float in raised
position.
!
SP6768-3 PROTEAM 4 GALLON 10/22/12 7:01 PM Page 10
Loading ...
Loading ...
Loading ...