Loading ...
Loading ...
Loading ...
Operation
24 - English
Customizing the power button
You can customize the power button on your remote to power on/off your
Solo
15 system, TV and cable/satellite box simultaneously.
1. Program your remote to control your TV and cable/satellite box (refer to
page 23).
2. Press
and simultaneously and hold for ten seconds.
Both buttons flash three times.
Resyncing your cable/satellite box and TV
After customizing the power button, your cable/satellite box and TV may become out
of sync and not power on/off simultaneously. Use the following steps to resync your
system.
1. Press the source button for the device that is out of sync.
2. Press
to power on/off the source.
3. Press
.
Your devices power on/off simultaneously
.
Switching between sources
You can switch from one source to another by pressing the appropriate source
button on the remote. In addition to controlling the selected source, the remote
always controls the basic speaker functions (on/off, volume, mute) of your Solo
15
system.
Note: Before you begin, ensure you have correctly programmed your sources.
1. Press the button for the source you want to control.
The source button glows.
2. Press
.
The source powers on.
3. Press
to select the correct input on your TV.
You may need to press
several times to select the TV input for the
source.
On some TVs,
displays a menu. Use your Solo 15 system remote to
choose the correct TV input and close this menu.
Loading ...
Loading ...
Loading ...