Loading ...
Loading ...
Loading ...
10
15. INSTALL THE ADAPTER/DAMPER ON BACK OF POWER PACK
(SINGLE BLOWER MODEL, HORIZONTAL DISCHARGE ONLY)
WALL
BACK VIEW SIDE VIEW
HH0127A
From the outside of the wall, using two no. 8 x 3/8’’
screws provided in parts bag, secure the adapter/
damper to the back of the power pack. Remove
tape from damper flap. Connect ducting to the
adapter/damper and seal the joint using metal foil
duct tape.
16. REINSTALL THE BLOWER (SINGLE BLOWER MODEL, HORIZONTAL DISCHARGE ONLY)
LEFT SIDE MOUNTING
SCREW LOCATIONS
RIGHT SIDE MOUNTING
SCREW LOCATIONS
HD0371
HD0372
The single blower power pack is factory shipped for a vertical
discharge installation. For a horizontal discharge installation,
the blower must be flipped. Using a 5/16” socket, or a Phillips or
Robertson no. 2 screwdriver, secure the blower to the inner back
of the power pack with all blower mounting screws (previously
removed in step 13).
Loading ...
Loading ...
Loading ...