Loading ...
Loading ...
Loading ...
1 DESCRIPTION
1.1 PURPOSE
This machine is used to cut grass, light weeds, and other
similar vegetation at or around ground level. The cutting
plane must be approximately parallel to the ground surface.
You cannot use the machine to cut or chop hedges, shrubs,
bushes, flowers and compost.
1.2 OVERVIEW
Figure 1 - 16.
1
Trigger
2
Rear handle
3
Lock-out button
4
Auxiliary handle
5
Upper shaft
6
Coupler
7
Lower shaft
8
Guard
9
Edge guide
10
Cut-off blade
11
Trimmer head
12
Edge wheel
13
Pivoting button
14
Edger button
15
Battery release button
16
Spool cover
17
Spool
18
Spool housing
19
Guide slot
20
Hole
21
Spool retainer button
A
Direction of roatation
B
Best cutting area
C
Dangerous cutting area
2 SAFETY
WARNING
Make sure that you do/obey all safety instructions.
Refer to Safety Manual.
3 INSTALLATION
WARNING
Remove the battery pack from the machine before
installation.
WARNING
Do not use accessories that are not recommended for this
machine.
3.1 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If parts of the machine are damaged, do not use the
machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
3.2 ATTACH THE GUARD
Figure 2.
WARNING
Do not touch the cut-off blade.
1. Remove the screws from the trimmer head with a Phillips
head screwdriver (not included).
2. Install the guard into the slots on trimmer head.
3. Turn the guard counterclockwise to lock it into place.
4. Align the screw holes on the guard with the screw holes
on the trimmer head.
5. Tighten the screws.
3.3 ASSEMBLE THE SHAFT
Figure 3
1. Insert the lower shaft into the coupler on the upper shaft.
NOTE
Make sure the upper and lower part of shafts are securely
tightened before installing the battery pack again.
2. Tighten the coupler.
3.4 INSTALL THE BATTERY PACK
Figure 4.
4
English
EN
Loading ...
Loading ...
Loading ...