Loading ...
Loading ...
Loading ...
28.5 inches
27.5 inches
27.5 inches
The Dryer may be installed in a built-in, recessed area, closet or alcove.
The installation spacing is in inches and is the minimum acceptable.
Other installation must use the minimum dimension indicated.
Minimum clearance between dryer cabinet and adjacent walls are: 2" either side and 3" front
and rear.
Minimum vertical space from floor to overhead cabinets, etc. is 52" (132 cm).
Closet door must be louvered or otherwise ventilated and must contain a minimum of 60 sq.in.
of open area equally distributed. If closet contains both a washer and a dryer, doors must contain
a minimum of 120 sq.in. of open area equally distributed.
No other fuel-burning appliance shall be installed in the same closet with the dryer.
Additional clearances for wall, door and floor moulding may be required.
Additional space is needed when an external exhaust elbow is used.
NOTE: If a door is installed that potentially encloses the unit while running, the door must allow for
a minimum of 20 square inches of free air movement. There must also be a 1" additional space in
front of the unit to the closed door and 1" from back of the unit to the wall. Additional spacing should
be considered for easy installation, servicing and compliance with all applicable local, state, and
federal codes.
3
Loading ...
Loading ...
Loading ...