Loading ...
Loading ...
Loading ...
English | 23
Bosch Power Tools F 016 L81 582 | (28.2.18)
Maintenance, Storage and
Transportation (see figure P)
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as during
transport and storage, remove the battery from the
power tool. There is danger of injury when unintentionally
actuating the On/Off switch with the locking button.
Clean the tool with the cloth before storage.
Remove the oil from the reservoir before storage.
When transporting or storing always fit the guide bar cover.
Note: Please do not hang the tool for storage onto the
branch.
Store and transport telescopic pole pruner with battery
removed and protection blade cover placed.
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts order, please always
include the 10-digit article number given on the type p,late of
the machine.
Pole Pruner rips,
vibrates, does not saw
properly
Chain tension too loose Tension saw chain
Blunt saw chain Replace saw chain
Saw chain worn out Replace saw chain
Saw chain teeth are facing in the wrong
direction
Reassemble with saw chain in correct direction
Too much force applied Reduce force
Cuts per battery charge
too low
Battery Thermal Protection operated Battery to cool and restart
Pole pruner cuts out
when sawing
Saw chain over tensioned “too tight” Retension saw chain
Over pressure applied to saw during cutting Reduce force applied to saw during cutting
New saw chain Reduce force applied to saw during cutting
Hard wood Reduce force applied to saw during cutting
Wood is wet Allow tool to cool down and restart
Saw chain teeth facing wrong way/direction
Reassemble with chain teeth in correct
direction
Over heating of tool Allow tool to cool down and restart
External or internal wiring defect Contact your Bosch Service Center
On/Off switch 16 defective Contact your Bosch Service Center
Flashing red battery
charge indicator
Battery not (properly) inserted Properly insert battery into battery charger
Battery contacts contaminated Clean the battery contacts (e.g. by inserting
and removing the battery several times) or
replace the battery
Battery charge indicators
do not light up
Battery will not charge
Mains plug of battery charger not plugged in
(properly)
Insert mains plug (fully) into the socket outlet
Socket outlet, mains cable or battery charger
defective
Check the mains voltage; have the battery
charger checked by an authorised after-sales
service agent for Bosch power tools
Battery and charger defective Replace battery and charger
Battery pack defective Replace the battery
Charger defective Replace charger
Problem Possible Cause Corrective Action
OBJ_BUCH-3155-002.book Page 23 Wednesday, February 28, 2018 10:04 AM
Loading ...
Loading ...
Loading ...