Loading ...
Loading ...
Loading ...
Checking the Last Time
Adjustment Result
1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
30
2.
Press (B).
The second hand points to the result of the
last auto time adjustment operation. The
watch hands will return to indicating the
current time if you do not perform any
operation for nine or ten seconds.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
30
Second hand
Note
●
Even if there was a successful time
calibration signal receive operation or
connection with a phone, the second
hand will point to
[N(NO)] if you
adjusted the time and/or date setting
manually.
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration
signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
30
2.
Press (B).
The second hand will indicate the last
receive result for nine or ten seconds.
30
3.
Within 10 seconds after pressing (B)
above, pull out the crown to the first click.
●
If more than 10 seconds elapse before
you pull out the crown after you press
(B), the second hand will return to
indicating seconds. If this happens,
press (B) again.
4.
Rotate the crown to disable auto time
adjustment.
[Y(YES)]: Auto time adjustment enabled.
[N(NO)]: Auto time adjustment disabled.
30
Crown
5.
Push the crown back in.
Note
●
If the watch is paired with a phone, G-
SHOCK Connected can be used to
disable auto time adjustment.
l
Using G-SHOCK Connected to
Disable Auto Time Adjustment
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between
the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch’s other settings.
Note
●
This
function is available only while G-
SHOCK Connected is running on the
phone.
●
This section describes watch and
phone operations.
X
: Watch operation
Y
: Phone operation
Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
●
If
the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
C
Pair the watch with a phone.
1.
Move
the phone close to (within one meter
of) the watch.
2.
X
While
the second hand is not pointing to
e
, hold down (C) for about four seconds.
This causes the second hand to move to
e
and establishes a connection between
the watch and phone.
Important!
●
If you have problems establishing a
connection, it could mean that G-
SHOCK Connected is not running on
the phone. On the phone’s home
screen, tap the “G-SHOCK
Connected” icon. After the app starts
up, hold down the watch’s (C) button
for about four seconds.
Operation Guide 5544
8
Loading ...
Loading ...
Loading ...