Loading ...
Loading ...
Loading ...
3.
Press (C).
Confirm that the small hour and minute
hands,
and the small 24-hour hand are all
stopped at 12 o’clock.
30
Small hour hand Small minute hand
Small 24-hour hand
4.
If the small hour and minute hands, and
the small 24-hour hand are not at 12
o’clock,
rotate the crown to align them with
12 o’clock.
5.
Press (C).
Confirm that the mode hand is stopped at
12 o’clock, and check if the day is
indicated properly.
30
30
Day (Operation start day)
Mode hand
6.
If the mode hand and or the day indicator
is out of alignment, rotate the crown to
move
the mode hand to 12 o’clock and the
day to the center of the indicator window.
●
The
movement range of the mode hand
and day indicator is limited when you
rotate the crown. The maximum left-
right movement of the mode hand is 180
degrees in either direction. The day
indicator moves only slightly.
●
After the mode hand and day indicator
are in the positions you want, advance
to step 9 of this procedure. If you are
unable to make the adjustments you
want, go to step 7.
7.
Press (C).
Confirm that the day indicator shows 1.
1
1
Day
●
Changing
the date setting will cause the
mode hand to rotate repeatedly. In
some cases, the mode hand may
continue to rotate for about 5 minutes.
l
Hand and Day Indicator Movement
8.
If 1 is not shown for the day, rotate the
crown until 1 is shown for the day.
●
The mode hand moves in conjunction
with crown rotation. Move the mode
hand to 12 o’clock.
9.
Push the crown back in.
Note
●
Leaving the crown pulled out for more
than
approximately 30 minutes without
performing any operation will
automatically cause the adjustment
operation to become disabled. If this
happens, push the crown back in to its
normal position and then pull it out
again to restart the procedure from the
beginning. Pushing the crown in to its
normal position part way through the
alignment procedure will cause the
hands to return to their normal position.
Any alignment you performed up to
that point will be applied.
Moving to Another Time
Zone
Use the procedure below to easily change day
and
time settings of the watch to a destination
location.
●
Before Boarding
1.
Configure the World Time to the current
time at your destination.
30
Destination time
Current time
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to Configure
Settings
2.
Disable auto time adjustment.
30
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to Configure
Settings
●
After Arriving
1.
Swap the origin time zone time with the
destination time zone time.
30
30
After swappingBefore swapping
Destination time
Destination time
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to Configure
Settings
2.
Enable auto time adjustment.
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to Configure
Settings
Operation Guide 5544
16
Loading ...
Loading ...
Loading ...