Loading ...
Loading ...
Loading ...
11
mWARNING! Always remove battery before lling
with water. NEVER immerse unit in water. Close battery
compartment door securely before lling. Always use caution
when handling or using any powered product where water is
present.
1. Fill the water tank with clean water (Fig. 5).
mWARNING! The intake water temperature must not
exceed 140ºF/60ºC.
mCAUTION! The washer must only be used with clean
water; use of unltered water containing corrosive chemicals
will damage the washer.
2. Open the battery compartment cover and slide the battery
in until it clicks to lock it into position, then close the
battery compartment cover (Fig. 6).
3. Position the washer as CLOSE as possible to the
object that need to be cleaned.
NOTE: The washer must be used on a secure and stable
surface in a standing, upright position.
4. Press the ON (I) side of the On/O switch to start the
portable washer and squeeze the spray gun trigger to use
the machine (Fig. 7).
NOTE: It's recommended to bleed the air in the hose
every time before starting the spray washer. Follow the
instructions in Maintenance section to bleed the air.
5. To shut down the unit, push the OFF(O) side of the On/O
switch (Fig. 7), and remove the battery.
Using the Spray Gun
mWARNING! High-pressure jets can be dangerous if
subject to misuse. The jet must not be directed at persons,
pets, live electrical equipment, or the appliance itself.
1. To use the spray gun, pull back the trigger to start the
water ow. Release the trigger to stop the water ow
(Fig. 8).
2. For continuous operation, push the trigger and lock it in
position 1 or position 2 (Fig. 9).
Fig. 5
Fig. 6
Battery
Fig. 7
On/O
switch
On
O
Fig. 8
Trigger
Pull back to
startwaterow
Loading ...
Loading ...
Loading ...